CostGuideHQ

Driveway Sealing Cost: $150–$2,000 (2026 Average: $545)

Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·5 min read·5 sources
Quick answerQuick answer: Sealing a driveway costs $545 on average nationally, with most projects landing between $150 and $2,000 depending on size, sealant type, and region. Per square foot, expect $1 to $2 installed, or roughly $400 to $800 for a typical two-car driveway (Bob Vila, HomeGuide, Angi).
  • National average cost to seal a driveway is $545, with reported source averages ranging from $468 to $572 and a typical spread of $150 to $2,000 (Bob Vila, Angi, HomeAdvisor, Fixr).
  • Expect $1 to $2 per square foot installed, or about $400 to $800 total for a standard 400-square-foot two-car driveway (HomeGuide).
  • Sealant type matters: coal tar and asphalt emulsion sealants run $0.06-$0.15 per square foot, while latex acrylic and eco-friendly formulas run $0.20-$0.40 (Bob Vila, HomeGuide, Fixr).
  • Concrete driveways generally cost more to seal than asphalt, around $1-$3 per square foot versus roughly $0.15-$0.23 (HomeGuide, Bob Vila).

How much does driveway sealing cost?

National average
$545
total project
Typical range
$150–$2,000
Most projects
Whole project
$400–$800
Advertisement · 728 × 90

Cost by material / type

TypeLowHigh
1-car driveway, ~288 sq ft$290$580
2-car driveway, ~400 sq ft$400$800
2-car driveway, ~576 sq ft$580$1,200
3-car driveway, ~864 sq ft$860$1,700
large circular driveway, ~1,650 sq ft$1,700$3,300
Estimate your cost
—

Rough estimate only — get local quotes for exact pricing.

What affects the cost?

  • Driveway size and square footage -- the per-square-foot rate holds fairly steady, so total cost scales directly with area, from about $290-$580 for a one-car driveway up to $1,700-$3,300 for a large circular driveway (HomeGuide)
  • Sealant type -- coal tar and asphalt emulsion sealants run as low as $0.06-$0.15/sq ft, while latex acrylic and eco-friendly formulas run $0.20-$0.40/sq ft (Bob Vila, HomeGuide, Angi, Fixr)
  • Surface material -- concrete driveways generally cost more to seal than asphalt, around $1-$3/sq ft versus roughly $0.15-$0.23/sq ft for asphalt (HomeGuide, Bob Vila)
  • Number of coats applied and whether cracks or potholes need repair first, which adds $0.60-$1.75/sq ft in labor (HomeAdvisor, Fixr)
  • Pre-sealing prep such as power washing, typically an extra $100-$500 (Angi, HomeAdvisor, Fixr)
  • Regional labor rates -- the same size driveway can cost several times more in high-cost states like California or Texas than in Ohio or Missouri (Angi)

Why does driveway sealing cost $150 to $2,000?

Most homeowners pay somewhere between $150 and $2,000 to seal a driveway, with reported national averages clustering around $468 to $572 depending on the source, and Bob Vila pegging a common spend around $545. That wide spread comes down to one thing above all else: size. Sealing runs roughly $1 to $2 per square foot installed (HomeGuide), or $1.25 to $1.50 per square foot once materials and labor are combined (Angi, HomeAdvisor, Bob Vila), so a small one-car driveway and a large circular one land on very different ends of the range. For a standard two-car driveway around 400 square feet, that works out to about $400 to $800 total (HomeGuide), which lines up closely with Fixr’s reported average of $468 for a 20x20-foot driveway. The rate itself stays fairly consistent; it’s the square footage that moves the final bill.

What affects the cost?

A handful of variables explain most of the difference between a $400 job and a $2,000 one:

  • Driveway size. Since pricing runs on a per-square-foot basis, a one-car driveway (about 288 sq ft) typically costs $290-$580, while a large circular driveway (around 1,650 sq ft) can run $1,700-$3,300 (HomeGuide).
  • Sealant type. Coal tar and asphalt emulsion sealants are the cheapest materials at $0.06-$0.15 per square foot. Oil-based runs $0.15-$0.20, latex acrylic $0.20-$0.35, and eco-friendly formulas $0.25-$0.40 (Bob Vila, HomeGuide, Angi, Fixr).
  • Surface material. Concrete driveways cost more to seal than asphalt, roughly $1-$3 per square foot versus $0.15-$0.23 for asphalt (HomeGuide, Bob Vila).
  • Repair needs. Cracks and potholes that need patching before sealing add labor, typically $0.60-$1.75 per square foot (HomeAdvisor, Fixr).
  • Prep work. Power washing to clean the surface before sealing usually runs $100-$500 as a separate line item (Angi, HomeAdvisor, Fixr).
  • Location. Regional labor rates cause big swings for the same size driveway — Angi’s state data shows $125-$900 in Ohio compared to $940-$3,950 in Texas.

How to lower your driveway sealing cost

  • Choose coal tar or asphalt emulsion sealant if durability needs are modest. These run $0.06-$0.15 per square foot, well below acrylic or eco-friendly options at $0.20-$0.40 (Bob Vila, HomeGuide, Fixr).
  • Handle power washing yourself beforehand. Since professional prep can add $100-$500 to the quote, renting a pressure washer for an afternoon can shave a meaningful chunk off the total (Angi, HomeAdvisor, Fixr).
  • Address small cracks early. Letting damage spread means paying $0.60-$1.75 per square foot in repair labor later — patching minor cracks yourself when they’re small avoids a bigger bill (HomeAdvisor, Fixr).
  • Get multiple local quotes. Because regional labor rates can swing the same job from under $200 to nearly $4,000 depending on the state, comparing a few local contractors matters more for this project than for most (Angi).
  • Bundle sealing with routine maintenance. Sealing every two to three years, rather than letting a driveway go until it needs extensive crack repair or a fill-and-seal product ($0.35-$0.50/sq ft), keeps each individual job cheaper over the life of the driveway (Bob Vila, HomeGuide).

Prices vary by driveway size, sealant choice, and where you live, so treat the figures above as a planning budget. Get two or three local quotes, and confirm whether power washing and crack repair are included before comparing bids.

Advertisement · 336 × 280

Frequently asked questions

How much does it cost to seal a driveway on average?
Sources put the national average between $468 and $572, with Bob Vila reporting many homeowners spend around $545. The full typical range runs $150 to $2,000 depending on driveway size and region (Bob Vila, Angi, HomeAdvisor, Fixr).
How much does driveway sealing cost per square foot?
Expect $1 to $2 per square foot installed (HomeGuide), or $1.25 to $1.50 per square foot when broken out as combined materials and labor (Angi, HomeAdvisor, Bob Vila).
Does sealing a concrete driveway cost more than asphalt?
Yes. Concrete sealing runs roughly $1 to $3 per square foot, compared to about $0.15 to $0.23 per square foot for asphalt (HomeGuide, Bob Vila).
What's the cheapest type of driveway sealant?
Coal tar and asphalt emulsion sealants are the least expensive materials, running $0.06 to $0.15 per square foot, versus $0.20 to $0.40 for latex acrylic or eco-friendly formulas (Bob Vila, HomeGuide, Angi, Fixr).
Is power washing included in the sealing cost?
Not always. Pre-sealing power washing is often billed separately at $100 to $500, or roughly $0.27 to $0.39 per square foot (Angi, HomeAdvisor, Fixr).
Why do driveway sealing quotes vary so much by state?
Local labor rates swing the total significantly. Angi reports ranges as low as $125-$900 in Ohio versus $945-$3,190 in California for a similar-size driveway.

Sources

Figures synthesized and cross-checked across these sources (retrieved 2026-07-24):

  • Bob Vila — Driveway sealing costs range from $275 to $820, with many homeowners spending around $545. Combined materials and labor run $1.25-$1.50 per sq ft; labor alone averages $1.15/sq ft; power washing prep runs $0.27-$0.39/sq ft. By surface: asphalt $0.15-$0.23/sq ft, concrete $0.85-$2.13/sq ft. Sealant material costs: asphalt polymer emulsion $0.08-$0.10, coal tar emulsion $0.06-$0.10, eco-friendly $0.25-$0.38, fast-dry $0.10, fill-and-seal $0.35-$0.50, latex acrylic $0.20-$0.25, oil-based $0.15-$0.20 per sq ft. A 500 sq ft driveway needs about 5 gallons of sealant, running $30-$100. State ranges: Ohio $125-$900, California $945-$3,190.
  • HomeGuide — Driveway sealing costs $1 to $2 per square foot with installation, or $400 to $800 total on average for a 400 sq ft (2-car) driveway. Materials run $0.10-$0.50/sq ft, labor $0.90-$1.50/sq ft. By driveway size: 1-car (288 sq ft) $290-$580; 2-car (400 sq ft) $400-$800; 2-car (576 sq ft) $580-$1,200; 3-car (864 sq ft) $860-$1,700; circular 50 ft diameter (1,650 sq ft) $1,700-$3,300. Sealant types: asphalt polymer emulsion $0.08-$0.15, coal tar emulsion $0.06-$0.15, latex acrylic $0.20-$0.25, oil-based $0.15-$0.20, fast-dry $0.10-$0.20, eco-friendly $0.25-$0.40 per sq ft. Concrete driveways: $1-$3 per sq ft installed or $575-$1,700 for a 2-car driveway. Dyed/pigmented sealants add $0.25-$0.50/sq ft. Professional power washing runs $100-$260.
  • Angi — Average cost to seal an asphalt driveway is $572, with a range of $150 to $2,000. Combined materials and labor run $1.25-$1.50/sq ft; labor alone runs $1.15/sq ft; power washing $0.27-$0.39/sq ft; minimum service fees $100-$200. Sealant types per sq ft: coal tar $0.06-$0.10, emulsion $0.08-$0.10, fast-drying ~$0.10, oil-based $0.15-$0.20, latex acrylic $0.20-$0.25, eco-friendly $0.25-$0.38, fill-and-seal $0.35-$0.50. Labor cost by size: 250 sq ft $290, 500 sq ft $575, 750 sq ft $860, 1,000 sq ft $1,150. State ranges: Florida $250-$1,515, California $945-$3,190, Texas $940-$3,950, Colorado $880-$1,690, Missouri $150-$1,600, Ohio $125-$900, Maine $275-$1,700, New York $125-$850.
  • HomeAdvisor — Overall average cost to seal an asphalt driveway is $572, with a normal range of $282-$867 (an alternate average of $439 with alternate range $226-$678 is also cited). Combined materials and labor run $1.25-$1.50/sq ft; labor alone runs $1.15/sq ft. Sealer types per sq ft: emulsion $0.08-$0.10, oil-based $0.15-$0.20, latex acrylic $0.20-$0.25, eco-friendly $0.25-$0.38, fill-and-seal $0.35-$0.50. Pressure washing runs $100-$500, averaging $210. Crack repair runs $0.60-$1.75 per sq ft. Cost factors cited: driveway size, shape, area accessibility, sealer type, number of coats, and preparation/repair needs.
  • Fixr — Average cost to seal an asphalt driveway is about $468 for a standard 20x20-ft (400 sq ft) driveway, water-blasted and swept. Typical range is $355-$600, with a low end of $159 and high end of $826. Per square foot pricing runs $0.88-$2.10, averaging about $1.05 for mid-grade work. Sealer types per sq ft: coal tar $0.08-$0.10, asphalt $0.15-$0.20, oil-based $0.15-$0.20, acrylic $0.25-$0.35, fill-and-seal $0.35-$0.50. Labor runs $0.60-$1.75 per sq ft. Colored asphalt sealant adds $0.25-$0.50/sq ft; weed control adds $0.25/sq ft.

National average and range figures vary by source depending on the assumed driveway size and region: Bob Vila reports an average around $545 (range $275-$820); Angi and HomeAdvisor report $572 (ranges $150-$2,000 and $282-$867 respectively, with an alternate HomeAdvisor average of $439); Fixr reports $468 for a standard 400 sq ft (20x20 ft) driveway. Per-square-foot figures cluster around $1.00-$2.00 installed (HomeGuide) or $1.25-$1.50 (Angi, HomeAdvisor, Bob Vila), covering both materials and labor. All figures describe professional sealcoating/sealing of an existing driveway, not full paving or replacement. Sealant-type-only figures above are materials cost per square foot and are consistently corroborated across four to five sources; they exclude labor, which typically adds $0.60-$1.75/sq ft on top (HomeAdvisor, Fixr).