CostGuideHQ

Electrical Outlet Installation Cost: $100–$450 (Average $237) in 2026

Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·6 min read·5 sources·US national averages, USD
Quick answerQuick answer: Installing a standard electrical outlet costs $100 to $450 nationally, averaging around $237. GFCI outlets run $150 to $350 installed, 220V/240V appliance outlets cost $250 to $800, and smart or USB outlets add $170 to $350. Distance from the panel and wall access drive the price most.
  • Installing a standard electrical outlet costs $100 to $450 per outlet, averaging around $237 nationally (Angi, HomeAdvisor, HomeGuide, Fixr).
  • GFCI outlets cost $150 to $350 installed as new, with Bob Vila citing a national average of $210 for a single GFCI outlet.
  • 220V/240V outlets for dryers, ranges, or EV chargers cost $250 to $800 installed and typically require a new dedicated circuit (HomeGuide).
  • Labor is most of the bill — electricians charge $40 to $130 per hour, with master electricians running up to $150 (HomeGuide, Angi, HomeAdvisor).

How much does electrical outlet installation cost?

National average
$237
per outlet
Typical range
$100–$450
Most projects
High end
$450+
Premium / complex
Advertisement · 728 × 90

Cost by material / type

TypeLowHigh
standard 120V$150$300
GFCI$150$350
220V/240V/250V appliance$250$800
smart Wi-Fi/USB$170$350
outdoor (weatherproof GFCI)$180$350
floor$175$700
Estimate your cost
—

Rough estimate only — get local quotes for exact pricing.

What affects the cost?

  • Outlet type and voltage — standard 120V outlets install for $150-$300, while 240V outlets for dryers, ranges, or EV chargers run $250-$800 because they need a dedicated circuit (HomeGuide)
  • GFCI vs. standard — a new GFCI outlet costs $150-$350 installed (HomeGuide), and Bob Vila puts the national average for a single GFCI outlet at $210, typical range $130-$300
  • AFCI protection — AFCI outlets cost $20-$30 more for the device itself than a standard outlet, on top of standard installation labor (Angi)
  • Smart or USB outlets — Wi-Fi or USB-equipped outlets cost $170-$350 installed, or $20-$50 for the device alone (HomeGuide, Angi)
  • Distance from the panel and wall accessibility — the farther the outlet is from the main panel or a junction box, and whether walls are open or already finished, drives how much wire-running labor is needed (HomeGuide, Angi)
  • Whether a new dedicated circuit is required — many 240V appliances need one, adding $250-$900 installed on top of the outlet itself (HomeGuide)
  • Labor rate — electricians charge $40-$130 per hour depending on experience and region, with master electricians charging up to $150 per hour (HomeGuide, Angi, HomeAdvisor)
  • Number of outlets in the project — Angi's per-quantity pricing runs $130-$300 for one outlet up to $1,350-$3,000+ for ten, since labor is often split across more units
  • Permits and drywall repair — opening walls to run wire can add $300-$800+ in drywall patching, and electrical permits run $50-$350 (HomeGuide, HomeAdvisor)

Why does outlet installation cost so much?

The price comes down to voltage, outlet type, and how far the new outlet sits from power. A standard 120V outlet costs $100 to $450 to install, averaging around $237 (Angi, HomeAdvisor, HomeGuide, Fixr) — though estimates vary because some sources price the device alone while others price the full installed job. HomeGuide, which breaks out full installed cost by type, puts a standard 120V outlet at $150 to $300 and a GFCI outlet at $150 to $350; Bob Vila separately reports a $210 national average for a single GFCI outlet, typical range $130 to $300. Appliance-grade 220V, 240V, or 250V outlets — the kind a dryer, range, water heater, or EV charger needs — cost $250 to $800 installed (HomeGuide), mostly because they require a dedicated circuit run back to the panel, not just a receptacle swap. Electrician Salvatore Cutrona puts it plainly: “The cost to install a new outlet may seem expensive, but the added convenience and prolonged safety benefits may justify those prices” (Angi).

What affects the cost?

A few factors explain most of the spread between a $100 job and a $450+ one:

  • Outlet type and voltage. Standard 120V outlets install for $150 to $300, while 240V outlets for dryers, ranges, or EV chargers run $250 to $800 because they need a dedicated circuit (HomeGuide).
  • GFCI or AFCI protection. A new GFCI outlet runs $150 to $350 installed (HomeGuide); AFCI outlets cost $20 to $30 more for the device itself than a standard outlet (Angi).
  • Smart or USB features. Wi-Fi or USB-equipped outlets cost $170 to $350 installed, or $20 to $50 for the device alone (HomeGuide, Angi).
  • Distance from the panel and wall access. The farther the outlet sits from the main panel or a junction box, and whether walls are open or already finished, drives how much wire-running labor is needed (HomeGuide, Angi).
  • Whether a new circuit is required. Many 240V appliances need a dedicated circuit, which adds $250 to $900 installed on top of the outlet itself (HomeGuide).
  • Labor rate. Electricians charge $40 to $130 per hour depending on experience and region, with master electricians running up to $150 per hour (HomeGuide, Angi, HomeAdvisor).
  • Number of outlets. Angi’s per-quantity pricing runs $130 to $300 for one outlet up to $1,350 to $3,000+ for ten, since labor is often shared across a single visit.
  • Permits and drywall repair. Opening walls to run wire can add $300 to $800+ in drywall patching, and electrical permits run $50 to $350 (HomeGuide, HomeAdvisor).

How to lower your outlet installation cost

  • Bundle multiple outlets into one visit. Per-outlet pricing drops as quantity goes up — Angi shows $130 to $300 for a single outlet versus $1,350 to $3,000+ for ten, well under 10x the single-outlet price.
  • Confirm whether you actually need a dedicated circuit. Standard 120V outlets skip the $250 to $900 dedicated-circuit add-on that 240V appliance outlets require (HomeGuide).
  • Pick tap-in locations near existing wiring. Placing a new outlet close to the panel or an accessible junction box cuts down the wire-running labor that drives most of the cost variance (HomeGuide, Angi).
  • Ask if your GFCI swap qualifies as a replacement, not a new install. Swapping an existing standard outlet for a GFCI model runs $90 to $200, well under the $150 to $350 cost of adding a brand-new GFCI outlet (HomeGuide).
  • Get multiple quotes, since labor alone ranges $40 to $150 per hour across experience levels and regions (HomeGuide, Angi, HomeAdvisor).

This guide covers adding or replacing individual outlets. If your whole house needs new wiring, or your panel can’t support additional circuits, those are separate, larger projects with their own pricing. Prices vary by region, outlet type, and wall access, so treat the figures above as a planning budget — get two or three local quotes, and confirm whether a dedicated circuit, permit, or drywall repair is included before committing to a final number.

Advertisement · 336 × 280

Frequently asked questions

How much does it cost to install a single electrical outlet?
Most homeowners pay $100 to $450 per outlet, averaging around $237 nationally (Angi, HomeAdvisor, HomeGuide, Fixr). For a single outlet specifically, Angi's typical range is $130 to $300.
How much does it cost to install a GFCI outlet?
A new GFCI outlet costs $150 to $350 installed (HomeGuide), and Bob Vila puts the national average for a single GFCI outlet at $210, typical range $130 to $300. Swapping an existing standard outlet for a GFCI model costs less, $90 to $200 (HomeGuide).
How much more does an AFCI outlet cost?
AFCI outlets cost $20 to $30 more for the device itself than a standard outlet (Angi), on top of standard installation labor.
How much does it cost to install a 220V or 240V outlet?
A 220V, 240V, or 250V outlet for a dryer, range, water heater, or EV charger costs $250 to $800 installed (HomeGuide), since these almost always require running a new dedicated circuit.
How much do smart or USB outlets cost to install?
Smart Wi-Fi or USB-equipped outlets cost $170 to $350 installed (HomeGuide), or $20 to $50 for the device alone if you already have someone doing the wiring (HomeGuide, Angi).
Does the price include running a new circuit?
Not always. A dedicated circuit for a large appliance costs $250 to $900 installed on top of the outlet itself (HomeGuide), and most 220V/240V appliances require one.
Why do outlet installation cost estimates vary so much between sources?
Averages range from about $141 (Fixr) to $300 (Angi) because sources define the job differently — some report device cost only, while others include full installed labor. Project size and outlet type also swing the number substantially.
How much does it cost to install several outlets at once?
Cost scales with quantity but isn't purely linear — Angi's table shows $130 to $300 for one outlet, $650 to $1,500 for five, and $1,350 to $3,000+ for ten, since electricians often make one trip and share labor across the job.

Sources

Figures synthesized and cross-checked across these sources (retrieved 2026-07-28):

  • HomeGuide — National average $280 to install a new outlet, minimum $40, maximum $1,500, typical range $150-$350; replacing an existing outlet averages $80-$200. By type (installed): standard 120V $150-$300 (device $1-$7), smart 120V Wi-Fi/USB $170-$350 (device $20-$50), GFCI $150-$350 new or $90-$200 to replace an existing outlet (device $12-$40), 220V/240V/250V appliance outlet $250-$800 (device $8-$30), ceiling outlet $200-$500, TV outlet $250-$500, floor outlet $175-$700, outdoor outlet $180-$350. Electricians charge $50-$130 per hour plus a $100-$200 trip fee. A dedicated circuit costs $250-$900 installed. Grounding an outlet costs $100-$300; grounding a whole house costs $2,000-$10,000+. A GFCI circuit breaker costs $120-$380. Moving an outlet costs $40 to more than $250. Electrical panel upgrade costs $850-$4,000. Drywall repair runs $300-$500 for small holes or $500-$800+ for larger ones. Electrical permits cost $50-$350.
  • Angi — Normal range $100-$450 per outlet nationally, average $300, low end $75, high end $485. Individual outlet cost $130-$300 on average. By type (device cost only, not including labor): standard 120V $3-$5, heavy-duty 220V/240V/250V $10-$20, GFCI $7-$25, AFCI $20-$30, floor $30-$50, smart $25-$50, USB $20-$40, outdoor full installation away from the house $1,000-$1,400. By quantity: 1 outlet $130-$300, 2 outlets $250-$600, 5 outlets $650-$1,500, 10 outlets $1,350-$3,000+. Fixing faulty or old wiring costs $540-$2,100. Labor averages $50-$100 per hour; master electricians charge $90-$150 per hour, less experienced electricians $40-$85 per hour. Electrician Salvatore Cutrona: 'The cost to install a new outlet may seem expensive, but the added convenience and prolonged safety benefits may justify those prices.'
  • Bob Vila — The typical GFCI outlet cost ranges from $130 to $300, with a national average of $210. GFCI outlets cost about $7 to $25 each for the device; standard electrical outlets cost $3 to $5. Labor rates for a local electrician run about $50 to $100 per hour, with a minimum service fee of $100 to $200. Outdoor GFCI installation runs $300 to $1,400. Rewiring costs $540 to $2,100. Service panel replacement costs $1,300 to $3,000. Permits run $10 to $500; inspections average about $160.
  • HomeAdvisor — Adding an electrical outlet costs an average of $229; professional electrical outlet installation costs between $138 and $320. A single outlet can run as little as $80 or climb to $596. Standard receptacles cost $3 to $5. By type: GFCI $7 to $25 each, AFCI $20 to $30, heavy-duty 220V/240V $10 to $20, smart outlets $25 to $50 each, USB $20 to $40, floor outlets $30 to $50 each. Standard electricians charge $50 to $100 per hour; master electricians charge $90 to $120 per hour. Electrical permits range from $50 to $100. Relocating an outlet costs $25 to $300.
  • Fixr — National average range $120-$200, national average of $141. Lowest reported installed cost $85 for a 15-amp residential-grade outlet, highest $275 for a 15-amp GFCI unit; 20-amp commercial-grade averages $141. By type (device cost): standard $1-$5, GFCI $10-$20, heavy-duty 220V/240V/250V $10-$20, USB $20-$40, smart $20-$80. Labor runs $40-$100 per hour. New wiring runs $40-$120 per hour and takes one to two hours. Adding a new circuit to the breaker box costs $10-$20. Outdoor outlet installation costs $250-$400 for a simple job or $1,000-$1,400 for a complex one. Relocating an outlet costs $50-$200. Grounding an outlet costs $100-$150.

Four sources report a national average for installing a single new electrical outlet: Fixr ($141 avg, $120-$200 typical range), HomeAdvisor ($229 avg, $138-$320 typical, $80-$596 per-outlet extremes), HomeGuide ($280 avg, $150-$350 typical, $40-$1,500 extremes), and Angi ($300 avg, $100-$450 typical range; $130-$300 average for a single outlet specifically). national_average_usd (237) is anchored near the midpoint of these four stated averages; range_low_usd/range_high_usd ($100-$450) use Angi's stated typical range, which brackets the other three sources' typical ranges. Higher-cost outlet types (240V appliance circuits, outdoor, floor outlets) and jobs that need a new dedicated circuit or wall/drywall work push individual projects above this headline range -- those figures are broken out in by_type and cost_factors instead of being folded into the headline number. Sources also differ in what a 'per-type' figure includes: Angi, HomeAdvisor, and Fixr report per-type numbers as device/material cost only, explicitly excluding labor, while HomeGuide and Bob Vila report full installed cost by type. by_type below uses HomeGuide's installed-cost table (the most complete apples-to-apples breakdown), cross-checked against Bob Vila's GFCI figure ($210 avg, $130-$300) and Angi's overall per-outlet average ($130-$300), to avoid conflating parts pricing with total installed cost. This guide covers adding or replacing individual outlets; a full-house rewire or an electrical panel upgrade are priced separately.