Gutter Installation Cost: $629–$1,734 (Average $1,181) in 2026
Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·5 min read·4 sources Quick answerQuick answer: Most homeowners pay $629 to $1,734 to install gutters, averaging around $1,181 nationally. Per linear foot, expect $4 to $40 depending on material — vinyl is cheapest, copper and wood cost the most. Home size, stories, and seamless-vs-sectional choice drive the final bill.
- ✓The typical gutter installation project costs $629 to $1,734, averaging about $1,181 nationally (HomeAdvisor, Bob Vila).
- ✓Vinyl gutters run $3 to $7 per linear foot installed, the cheapest material option (HomeAdvisor).
- ✓Copper is the priciest material at $15 to $40 per linear foot installed, with wood close behind at $20 to $32 (HomeAdvisor).
- ✓Seamless gutters add labor cost over sectional systems — $3 to $10 per linear foot versus $2 to $6 (Bob Vila).
How much does gutter installation cost?
National average
$1,181
total project
Typical range
$622–$4,222
Most projects
Advertisement · 728 × 90
Cost by material / type
| Type | Low | High |
|---|
| vinyl | $3 | $7 |
| aluminum | $3 | $15 |
| galvanized steel | $5 | $20 |
| zinc | $15 | $30 |
| copper | $15 | $40 |
| wood | $20 | $32 |
What affects the cost?
- Material choice (vinyl runs cheapest at $3-$7 per linear foot; aluminum $3-$15; galvanized steel $5-$20; zinc $15-$30; copper $15-$40; wood $20-$32 — HomeAdvisor)
- Total linear footage needed, which scales with home size (This Old House shows 100 linear feet at $1,195-$6,085 versus 250 linear feet at $2,857-$15,059)
- Number of stories and roof pitch/complexity, which slow down installers and add labor cost (Bob Vila notes a $1-$3 per linear foot surcharge per additional story)
- Seamless vs. sectional systems — seamless labor runs $3-$10 per linear foot versus $2-$6 for sectional (Bob Vila)
- Old gutter removal and disposal, typically $1-$2 per linear foot for removal plus $150-$350 disposal (HomeAdvisor); Fixr cites $1.31-$2.38 per linear foot for removal
- Downspouts, priced separately at $4-$21 per linear foot (HomeAdvisor) or $7.43-$13.51 per linear foot (Fixr)
- Local labor rates and regional rainfall/climate norms
- Contractor size and reputation — larger, established companies tend to charge more (This Old House)
Why does gutter installation cost so much?
Gutters are priced almost entirely by material and linear footage, which is why quotes vary so widely. A typical whole-home project costs $629 to $1,734, averaging around $1,181 nationally (HomeAdvisor), and Bob Vila’s figures land in the same range — average $1,135, typical range $622 to $1,677. Broken down per linear foot, vinyl is cheapest at $3 to $7, aluminum runs $3 to $15, galvanized steel $5 to $20, zinc $15 to $30, wood $20 to $32, and copper tops the list at $15 to $40 (HomeAdvisor). A one-story home averages about $1,200 to install, while a two-story home runs closer to $2,000 because of added labor for height and access (Bob Vila). Larger homes with more roofline, or premium materials like copper, push total costs into the thousands, which is why some sources report whole-project averages as high as $3,223 (Fixr).
What affects the cost?
A few factors explain most of the spread between a $629 job and a $1,734+ one:
- Material. Vinyl costs $3 to $7 per linear foot installed, aluminum $3 to $15, galvanized steel $5 to $20, zinc $15 to $30, wood $20 to $32, and copper $15 to $40 (HomeAdvisor).
- Home size. More roofline means more linear feet of gutter — This Old House shows a 100-linear-foot job at $1,195 to $6,085 versus a 250-linear-foot job at $2,857 to $15,059.
- Stories and roof complexity. Additional stories and steep or complex rooflines slow down installers, adding roughly $1 to $3 per linear foot per story (Bob Vila).
- Seamless vs. sectional. Seamless systems, fabricated on-site to fit your home exactly, run $3 to $10 per linear foot in labor versus $2 to $6 for pre-cut sectional gutters (Bob Vila).
- Old gutter removal. Tearing out and hauling away old gutters typically adds $1 to $2 per linear foot plus $150 to $350 in disposal fees (HomeAdvisor).
- Downspouts. Priced separately at $4 to $21 per linear foot (HomeAdvisor) or $7.43 to $13.51 per linear foot (Fixr), depending on how many your home needs.
- Region and contractor. Local labor rates and rainfall norms vary, and larger, established companies often charge more than smaller crews (This Old House).
How to lower your gutter installation cost
- Choose aluminum or vinyl over copper or wood unless you specifically want the look or longevity — the material alone can be the difference between a $3 and a $40 per-linear-foot rate (HomeAdvisor).
- Consider sectional gutters instead of seamless if budget is the priority. Sectional systems cost less in labor, at $2 to $6 per linear foot versus $3 to $10 for seamless (Bob Vila).
- Keep your existing gutters if they’re structurally sound. Skipping removal avoids the $1 to $2 per linear foot removal cost and disposal fee (HomeAdvisor).
- Bundle downspout work with the main installation rather than hiring separately — one crew handling the whole job is typically more efficient than splitting it across contractors.
- Get multiple quotes, especially for larger or multi-story homes, since story count and roof complexity swing labor pricing by several dollars per linear foot between contractors (Bob Vila, Fixr).
Prices vary by region, home size, and material, so treat the figures above as a planning budget. Get two or three local quotes, and confirm whether removal, downspouts, and gutter guards are included, before committing to a final number.
Advertisement · 336 × 280
Frequently asked questions
How much does it cost to install gutters on an average house?+
A typical single-story home runs about $1,200, while a two-story home averages closer to $2,000 (Bob Vila). Overall, most homeowners pay $629 to $1,734, averaging $1,181 (HomeAdvisor).
What's the cheapest gutter material?+
Vinyl is the least expensive option at $3 to $7 per linear foot installed (HomeAdvisor), with aluminum close behind at $3 to $15 per linear foot.
How much more do seamless gutters cost than sectional?+
Seamless gutter labor runs $3 to $10 per linear foot compared to $2 to $6 for sectional systems (Bob Vila), reflecting the specialized on-site fabrication seamless gutters require.
Does the price include removing my old gutters?+
Usually not — it's typically a separate line item. HomeAdvisor puts removal at $1 to $2 per linear foot plus $150 to $350 for disposal, while Fixr cites $1.31 to $2.38 per linear foot for removal.
How much do copper gutters cost compared to aluminum?+
Copper runs $15 to $40 per linear foot installed versus $3 to $15 for aluminum (HomeAdvisor) — copper costs several times more but lasts significantly longer and doesn't need repainting.
Why do gutter cost estimates vary so much between sources?+
National averages range from about $1,135 to $1,181 for a typical home (Bob Vila, HomeAdvisor) up to $3,223 for larger or premium-material projects (Fixr), and per-linear-foot figures span $3 to $62 depending on material, home size, and story count across sources.
Sources
Figures synthesized and cross-checked across these sources (retrieved 2026-07-24):
- HomeAdvisor — Gutter replacement averages $1,181, typical range $629-$1,734, or $4-$40 per linear foot. By material per linear foot: vinyl $3-$7, aluminum $3-$15, galvanized steel $5-$20, faux copper $5-$10, zinc $15-$30, copper $15-$40, wood $20-$32. By gutter type per linear foot: K-style $3-$37, half-round $3-$34, custom built $6-$40. Old gutter removal $1-$2 per linear foot; disposal $150-$350. Labor accounts for 10-50% of the total bill depending on accessibility.
- Bob Vila — National average $1,135; typical range $622 to $1,677. Per linear foot by material: vinyl $3-$6, aluminum $4-$14, galvanized steel $6-$14, stainless steel $9-$20, zinc $10-$29, copper $25-$40+. Labor: sectional gutters $2-$6 per linear foot, seamless gutters $3-$10 per linear foot, additional-story surcharge $1-$3 per linear foot per story. One-story home approximately $1,200; two-story home approximately $2,000. 100 linear feet: $500-$1,500; 200 linear feet: $1,000-$3,000.
- Fixr — National average $3,223; range $2,320-$4,222. Per linear foot by material: vinyl/PVC $5-$10, aluminum $7-$13, steel $7-$12, zinc $16-$29, wood $17-$31, copper $18-$32. Whole-home installation (200 linear feet basis): vinyl/PVC $1,044-$1,900, aluminum $1,467-$2,668, steel $1,344-$2,445, zinc $3,192-$5,808, wood $3,384-$6,157, copper $3,491-$6,352. Gutter removal $1.31-$2.38 per linear foot; downspout installation $7.43-$13.51 per linear foot; heat tape approximately $5 per linear foot.
- This Old House — Per linear foot $12-$62 (low to high end), with $37 average. 200 linear feet (2,000 sq ft home): $2,303-$12,067. By home size: 1,000 sq ft (100 linear feet) $1,195-$6,085; 1,500 sq ft (150 linear feet) $1,749-$9,076; 2,500 sq ft (250 linear feet) $2,857-$15,059. By material installed total: vinyl $2,388, aluminum $3,352, galvanized steel $3,421, steel $3,533, wood $8,633, copper $7,566. Brackets $2-$17; downspouts $4-$21; splash blocks $6-$66; end caps $2-$10; hangers $2-$17.
Two sources closely agree on a typical whole-home project: HomeAdvisor (average $1,181, typical range $629-$1,734, $4-$40 per linear foot) and Bob Vila (average $1,135, typical range $622-$1,677). Fixr reports a notably higher national average ($3,223, range $2,320-$4,222) and This Old House reports higher per-linear-foot pricing ($12-$62/ft, $37/ft average, with a 100-linear-foot job running $1,195-$6,085) — both likely reflect larger homes, seamless/premium-material assumptions, or bundled extras (downspouts, guards) rather than a directly comparable base install. national_average_usd, range_low_usd, and range_high_usd here are anchored to the HomeAdvisor/Bob Vila cluster for the low end and Fixr's typical-range high end to represent the full realistic spread from a small vinyl sectional job to a larger seamless or premium-material install. by_type figures (per linear foot, installed) come from HomeAdvisor's material breakdown, which aligns with Fixr's and This Old House's material-cost tables. Figures generally include material and standard installation labor; old-gutter removal, downspouts, and gutter guards are commonly quoted as separate line items.