Kitchen Faucet Installation Cost (2026): $100–$800 per Project
Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·5 min read·6 sources Quick answerQuick answer: Kitchen faucet installation typically costs $150 to $400 for a straightforward swap, averaging around $260-$300, with the full range running $100-$800 depending on faucet style and finish. A basic single-handle faucet runs $150-$350, while pull-down, touchless, or wall-mounted models cost more (HomeGuide, HomeAdvisor).
- ✓A typical faucet swap costs $150-$400, averaging $260-$300, with the wider range running $100-$800 (Fixr, HomeGuide, HomeAdvisor).
- ✓Single-handle faucets run $150-$350, while pull-down and pull-out styles run $175-$500 (HomeGuide, HomeAdvisor).
- ✓Bridge and touchless faucets cost the most at $400-$700, and wall-mounted installation labor alone can run $500-$1,500 (HomeGuide).
- ✓Relocating a faucet along the countertop adds $150-$300, and moving it to a kitchen island can add $500 or more (Fixr).
How much does kitchen faucet installation cost?
National average
$280
total project
Typical range
$100–$800
Most projects
Advertisement · 728 × 90
Cost by material / type
| Type | Low | High |
|---|
| Single-handle faucet | $150 | $350 |
| Pull-down faucet | $175 | $500 |
| Pull-out faucet | $175 | $500 |
| Pot filler faucet | $150 | $500 |
| Bridge or touchless faucet | $400 | $700 |
| Wall-mounted installation (labor) | $500 | $1,500 |
What affects the cost?
- Faucet style - single-handle models run $150-$350 while pull-down and pull-out styles run $175-$500, and bridge or touchless models run $400-$700 (HomeGuide)
- Finish and material - chrome is the cheapest finish at $40-$200 while brushed/matte, stainless, brass, and bronze finishes run $80-$750 (HomeAdvisor)
- Mounting type - deck-mounted installation runs $300-$800 while wall-mounted installation runs $500-$1,500 due to extra plumbing work (HomeGuide)
- Whether the old faucet must be removed and whether new holes need drilling in the countertop or sink (Fixr, Homewyse)
- Relocating the faucet - a lateral move along the countertop adds $150-$300, and moving it to a kitchen island adds $500 or more (Fixr)
- Labor rate - plumbers charge roughly $45-$200 per hour depending on region and job complexity (HomeGuide, HomeAdvisor)
- Permits - required for new-location installs, typically $50-$500 (HomeGuide) or $150-$250 (Angi)
- Add-ons bundled into the job - a built-in soap dispenser ($25-$100), water filtration system ($100-$500), or instant hot-water dispenser ($300-$900 installed) (Fixr, HomeGuide, HomeAdvisor)
Why does kitchen faucet installation cost so much?
A straightforward kitchen faucet swap typically costs $150 to $400, averaging around $260-$300 for the faucet and professional labor combined (Fixr, HomeGuide, HomeAdvisor). The wider range you’ll see quoted, $100 up to $800, reflects how much faucet style and finish matter: a basic single-handle faucet runs $150-$350, while pull-down and pull-out models climb to $175-$500, and bridge or touchless faucets top out around $400-$700 (HomeGuide). Labor itself is fairly contained for a standard job, since a plumber can usually swap a faucet in 30 minutes to an hour (Angi), with a basic installation running $260-$480 (HomeAdvisor). Homewyse’s more itemized 2026 estimate, which separately bills the faucet, labor, supplies, and old-faucet removal, lands higher at $467-$773 per faucet - a useful reminder that a “full-service” quote can run well above the typical homeowner-reported average.
What affects the cost?
Faucet style is the single biggest lever: single-handle models are the cheapest to buy and install, pull-down/pull-out models cost more for the added hardware, and bridge or touchless faucets cost the most due to their more complex mechanisms (HomeGuide, HomeAdvisor). Finish matters almost as much - chrome runs $40-$200 while brass, bronze, and stainless finishes can reach $750 (HomeAdvisor). Mounting type changes the labor bill significantly: a standard deck-mounted installation runs $300-$800 in labor, but wall-mounted faucets require opening up the wall for plumbing access, pushing labor to $500-$1,500 (HomeGuide). Relocating the faucet, even a few inches down the countertop, adds $150-$300, and moving it to an island can add $500 or more once new water lines are run (Fixr). Add-ons like a built-in soap dispenser, water filtration system, or instant hot-water dispenser also stack onto the base job (Fixr, HomeGuide).
How to lower your kitchen faucet installation cost
- Stick with a single-handle, deck-mounted faucet. This is the cheapest combination at $150-$350 versus $400-$700 for a bridge or touchless model, or $500-$1,500 in labor alone for a wall-mounted setup (HomeGuide).
- Keep the faucet in its current location. Avoiding a lateral move or a relocation to a kitchen island saves $150-$500+ in extra plumbing work (Fixr).
- Compare finishes, not just brands. Chrome runs as low as $40 while brass and bronze finishes of the same faucet model can cost several times more (HomeAdvisor).
- Bundle add-ons into the same visit. If you also want a soap dispenser or filtration system, having the plumber install everything in one trip avoids a second service call (Fixr, HomeGuide).
- Get more than one quote for labor. Hourly plumber rates span $45-$200, so a second estimate can meaningfully change your total, especially for anything beyond a basic swap (HomeGuide, HomeAdvisor).
Prices vary by region, faucet brand, and how much existing plumbing you can reuse, so get a couple of local quotes before committing. The figures here are researched estimates meant to help you budget, not a substitute for an on-site quote.
Advertisement · 336 × 280
Frequently asked questions
How much does it cost to install a kitchen faucet?+
A straightforward replacement typically costs $150 to $400, averaging around $260-$300 (Fixr, HomeGuide, HomeAdvisor). The full range across all sources runs $100-$800 depending on the faucet style, finish, and whether any extra plumbing work is needed.
Is a single-handle or pull-down faucet cheaper to install?+
Single-handle faucets are the cheapest common style at $150-$350. Pull-down and pull-out faucets run a bit more at $175-$500, while bridge and touchless models are the priciest at $400-$700 (HomeGuide, HomeAdvisor).
Does the faucet finish affect installation cost?+
Yes. Chrome is generally the most affordable finish at $40-$200, while brushed/matte, stainless, brass, and bronze finishes run $80-$750 depending on the model (HomeAdvisor).
How much more does it cost to move a kitchen faucet to a new spot?+
Moving a faucet laterally along the same countertop adds about $150-$300 to the job. Relocating it to a kitchen island, which usually means running new water lines, can add $500 or more (Fixr).
How much does labor alone cost for kitchen faucet installation?+
Plumbers typically charge $45-$200 per hour. A basic deck-mounted installation runs $300-$800 in labor, while a wall-mounted installation, which involves more plumbing work, runs $500-$1,500 (HomeGuide).
Do I need a permit to install a kitchen faucet?+
Not for a like-for-like swap. If you're installing a faucet at a brand-new location rather than replacing an existing one, budget $150-$250 for plumbing permits, or up to $500 depending on the jurisdiction (Angi, HomeGuide).
Sources
Figures synthesized and cross-checked across these sources (retrieved 2026-07-24):
- Fixr — National average cost of $300; range $150-$400 typical, $100-$800 overall. Pull-out/pull-down described as most affordable; gantry and motion-detector models cost more. Chrome usually the most affordable finish, copper the most expensive. Materials alone $75 (budget) to over $600 (luxury); professional installation with materials $150 to over $600. Relocation: plumbing work alone ~$300, total relocation ~$600; lateral move along countertop adds $150-$300; move to kitchen island adds $500 or more. Add-ons: soap dispenser $40-$100, water filtration $100-$400, instant-hot faucet $400-$900 installed, garbage disposal $300-$600.
- HomeGuide — National average $260; typical range $161-$364. By type (materials only): bridge $400-$700, pot filler $150-$500, pull-down $175-$500, pull-out $175-$500, single-handle $150-$350, touchless $400-$700. Brand ranges (materials only): American Standard $60-$540, Delta $50-$700, Kohler $30-$2,400, Moen $50-$1,000, Pfister $40-$600. Labor: professional labor $260-$480; deck-mounted installation $300-$800; wall-mounted installation $500-$1,500. Permits $50-$500; plumber hourly rate $45-$200/hour. Add-ons: adjustable angle faucet $15-$200, faucet extender $15, soap dispenser $25-$50, water filtration system $150-$500.
- Homewyse — National average (May 2026 data) $467-$773 per faucet, installed. Itemized: kitchen faucet (product) $212.26-$465.20, installation labor (basic) $212.26-$465.20, job supplies $212.26-$465.20, remove old faucet (optional) $212.26-$465.20, debris disposal $2.84-$3.23 per unit.
- HomeAdvisor — Average cost $262; normal range $162-$364; low end $91; high end $600. By type: kitchen sink faucet $25-$1,800, pot filler $150-$500, bar faucet $60-$2,700, wall mounted $100-$800. By style: single handle $150-$350, dual handle $35-$1,000, pull down $175-$500, pull out $175-$500. By finish: chrome $40-$200, enamel $60-$220, brushed/matte $80-$600, stainless $105-$750, brass/bronze $130-$750. Labor: hourly rate $45-$200; basic installation $260-$480; complex installation $320-$1,600. Add-ons: soap dispenser $25-$50, faucet extenders from $15, water filtration $150-$500, hot water dispensers $300-$600.
- Angi — Cost to install a kitchen faucet ranges between $91 and $600 based on faucet type and finish; most homeowners pay about $262 on average. Professional installation costs $162-$364 based on faucet type and replacement needs; touchless and bridge models cost more than single-handle or pull-down options. A plumber can typically replace a kitchen faucet in 30 minutes to one hour. New-location installation should budget plumbing permits of $150-$250.
- Forbes Home — Average cost between $150 and $400 to install a new kitchen or bathroom faucet; with cheaper models and DIY installation, prices could be as low as $50, while higher-end units or complicated projects requiring a plumber could cost up to $4,000. Faucet style, the room being installed in, and special features affect final cost.
Sources cluster around two different scopes. Fixr, HomeGuide, Angi, and HomeAdvisor all describe a straightforward faucet swap (faucet + labor) in the $150-$400 range, with a stated average of $260-$300 and a wider typical range of $91-$600 to $100-$800 once faucet type and finish are factored in. Homewyse's calculator, which itemizes faucet, installation labor, job supplies, and old-faucet removal/debris disposal as separate line items, produces a notably higher installed total of $467-$773 for May 2026 - this is presented here as a full-service, itemized estimate rather than the typical homeowner-reported figure, and explains why the top of the overall range extends toward $800. $280 is used as the national average as a synthesized midpoint between the lowest ($260, HomeGuide) and highest ($300, Fixr) of the explicitly stated averages ($260 HomeGuide, $262 Angi/HomeAdvisor, $300 Fixr). By-type/by-style figures (single-handle $150-$350, pull-down/pull-out $175-$500, bridge/touchless $400-$700) reflect HomeGuide's own 'by type (materials only)' breakdown; HomeAdvisor lists closely matching by-style figures without specifying scope. These are treated here as faucet-type cost ranges rather than confirmed installed totals, and the guide's copy is worded accordingly. Figures generally cover a like-for-like replacement with existing water lines in place; they exclude major plumbing relocation, new permits, and countertop replacement/re-drilling beyond a standard 1-3 hole pattern unless noted. Wall-mounted installations, where labor alone can run $500-$1,500 (HomeGuide) due to extra plumbing access work, can exceed the general $100-$800 project range.