CostGuideHQ

Well Pump Replacement Cost: $977–$2,822 (Average $1,900) in 2026

Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·7 min read·5 sources·US national averages, USD
Quick answerQuick answer: Replacing a well pump costs $977 to $2,822 for most homeowners, averaging about $1,900 nationally. Submersible pumps run $275 to $1,550 installed; jet pumps for shallower wells cost less, $230 to $1,200. Well depth, pump horsepower, and whether the pressure tank needs replacing too drive the final bill.
  • Most homeowners pay $977 to $2,822 to replace a well pump, averaging around $1,900 nationally (HomeAdvisor, Angi).
  • Submersible pumps cost $275 to $1,550 installed — more than jet pumps, which run $230 to $1,200 depending on well depth (HomeAdvisor).
  • Wells deeper than 150 feet can push total cost to $2,000-$10,000+, versus $400-$3,000+ for wells under 25 feet deep (Angi).
  • If the pressure tank needs replacing along with the pump, add $800 to $3,800 to the job (HomeAdvisor, Bob Vila).

How much does well pump replacement cost?

National average
$1,900
total project
Typical range
$200–$5,800
Most projects
Whole project
$977–$2,822
Advertisement · 728 × 90

Cost by material / type

TypeLowHigh
shallow well jet pump$230$1,000
deep well jet pump$440$1,200
submersible pump$275$1,550
constant pressure pump$2,000$5,000
hand pump$150$1,500
Estimate your cost
—

Rough estimate only — get local quotes for exact pricing.

What affects the cost?

  • Pump type — submersible pumps run $275-$1,550 installed, versus $230-$1,000 for a shallow well jet pump and $440-$1,200 for a deep well jet pump (HomeAdvisor)
  • Well depth — wells over 150 feet cost $2,000-$10,000+ to replace, versus $400-$3,000+ for wells under 25 feet deep, since deeper wells need longer drop pipe and a stronger motor (Angi)
  • Pump horsepower and size — larger homes or higher water demand need more powerful motors, which increases both equipment and installation cost (This Old House, HomeGuide)
  • Pressure tank — replacing the pressure tank alongside the pump adds $800-$3,800 (HomeAdvisor, Bob Vila); replacing just the tank on its own runs $500-$1,000 (HomeGuide)
  • Labor — plumbing labor runs $250-$1,000 depending on job complexity, at an hourly rate of $45-$150 (HomeAdvisor, Angi)
  • Electrical work — new wiring or repairs for the pump circuit adds $50-$130 per hour (HomeGuide) to $50-$100 per hour (Angi)
  • New pipework — switching pump types or replacing damaged drop pipe adds cost; submersible pipework alone runs $250-$2,500 (Bob Vila)
  • Permits — typically $50-$200 depending on local requirements (HomeAdvisor)

How much does it cost to replace a well pump?

Replacing a well pump costs $977 to $2,822 for most homeowners, averaging around $1,900 nationally (HomeAdvisor, Angi). The full spread reported across sources runs $200 to $5,800, which captures everything from a small shallow-well jet pump swap to a deep submersible replacement with new pipework. Bob Vila’s figures land close by — average $1,785, typical range $942 to $2,629 — and This Old House puts the typical job at $900 to $2,500. HomeGuide reports a similar $1,800 average but a much higher ceiling of $20,000, which reflects outlier jobs like solar or windmill pump installs rather than a standard replacement. The number that moves the price most is pump type: a submersible pump costs meaningfully more than a jet pump.

Submersible vs. jet pump: which costs more to replace?

Submersible pumps cost more. Installed, a submersible pump runs $275 to $1,550, compared with $230 to $1,000 for a shallow well jet pump and $440 to $1,200 for a deep well jet pump (HomeAdvisor). The gap comes down to where each pump sits and how it works: jet pumps mount above ground and pull water up using suction, while submersible pumps sit down inside the well itself and push water up with a sealed underwater motor (This Old House). That underground placement is also why submersible replacements cost more in labor — pulling a pump that may be connected to hundreds of feet of pipe and wiring is a bigger job than swapping an above-ground unit. Most modern residential wells over 25 feet deep use a submersible pump, while shallower wells often still run on a jet pump.

What affects well pump replacement cost?

  • Well depth. Wells deeper than 150 feet run $2,000 to $10,000+ to replace, versus $400 to $3,000+ for wells under 25 feet deep — deeper wells need longer drop pipe, more wire, and a stronger motor (Angi).
  • Pump horsepower and size. Larger homes or higher water demand call for a more powerful motor, which raises both equipment and installation cost (This Old House, HomeGuide).
  • Pressure tank. Replacing the pressure tank alongside the pump adds $800 to $3,800 (HomeAdvisor, Bob Vila); replacing just the tank on its own runs $500 to $1,000 (HomeGuide).
  • Labor. Plumbing labor runs $250 to $1,000 depending on complexity, at $45 to $150 per hour (HomeAdvisor, Angi).
  • Electrical work. New wiring or repairs for the pump circuit adds $50 to $130 per hour (HomeGuide, Angi).
  • New pipework. Switching pump types or replacing damaged drop pipe adds cost — submersible pipework alone runs $250 to $2,500 (Bob Vila).
  • Permits. Typically $50 to $200 depending on local requirements (HomeAdvisor).

As This Old House plumbing and heating expert Richard Trethewey has explained, constant on-and-off pump cycling wears on the equipment over time — it’s also a common early warning sign that a pump (or its pressure tank) is due for replacement before it fails outright.

How to lower your well pump replacement cost

  • Match the pump to your well, not the other way around. A shallow well jet pump costs less than a submersible unit ($230-$1,000 vs. $275-$1,550 installed, HomeAdvisor) — don’t pay for submersible capacity a shallow well doesn’t need.
  • Check the pressure tank before you replace the pump. If the tank is still healthy, you skip the extra $800 to $3,800 that comes with replacing both (HomeAdvisor, Bob Vila).
  • Reuse existing pipework where it’s still in good condition, since new submersible pipework alone can run $250 to $2,500 (Bob Vila).
  • Watch for early warning signs — frequent cycling, sputtering faucets, or rising electric bills — and address them before a full failure forces an emergency call, which typically costs more than a scheduled replacement.
  • Get multiple quotes, especially for deeper wells, since well depth alone can swing the price from under $3,000 to over $10,000 between contractors (Angi).

Prices vary by region, well depth, and pump type, so treat the figures above as a planning budget. Get two or three local quotes, and confirm whether the pressure tank, permits, and any new pipework are included before committing to a final number.

Advertisement · 336 × 280

Frequently asked questions

How much does it cost to replace a well pump?
Most homeowners pay $977 to $2,822, averaging about $1,900 nationally (HomeAdvisor, Angi). The full range reported across sources runs $200 to $5,800, depending on pump type, well depth, and whether other parts need replacing too.
Is a submersible pump more expensive than a jet pump?
Yes. A submersible pump runs $275 to $1,550 installed, compared with $230 to $1,000 for a shallow well jet pump and $440 to $1,200 for a deep well jet pump (HomeAdvisor). Submersible pumps cost more because they sit inside the well itself and require pulling long sections of pipe and wiring to replace.
How much does well depth affect the cost?
A lot. Wells over 150 feet deep can run $2,000 to $10,000+ to replace, while wells under 25 feet deep typically cost $400 to $3,000+ (Angi). Deeper wells need longer drop pipe, more wire, and a stronger pump to lift water to the surface.
Does the price include the pressure tank?
Not always — check what your quote covers. Replacing the pressure tank along with the pump adds $800 to $3,800 (HomeAdvisor, Bob Vila). If only the tank needs replacing on its own, that runs $500 to $1,000 (HomeGuide).
Does pump horsepower change the price?
Yes. Larger homes or properties with higher water demand need a pump with a more powerful motor, which raises both the equipment cost and the installation labor (This Old House, HomeGuide).
How much does labor cost for a well pump replacement?
Plumbing labor runs $250 to $1,000 depending on job complexity, at an hourly rate of $45 to $150 (HomeAdvisor, Angi). If new electrical wiring is needed for the pump circuit, that adds $50 to $130 per hour on top (HomeGuide, Angi).
Why do well pump cost estimates vary so much between sources?
HomeAdvisor and Angi both report a $1,900 average and $977-$2,822 typical range — the two share cost-data infrastructure, so their figures track closely. Bob Vila reports a similar but independently-derived $1,785 average ($942-$2,629 typical range), while HomeGuide's reported ceiling runs as high as $20,000, reflecting outlier eco-pump and very-deep-well jobs rather than a typical replacement.
How do I know if I need a submersible or jet pump?
It comes down to well depth. This Old House notes submersible pumps typically serve wells 200 to 300 feet deep or more, shallow well jet pumps handle wells under 25 feet, and deep-well jet pumps cover wells beyond 25 feet, sometimes past 100 feet. A well contractor can confirm which type your well already uses.

Sources

Figures synthesized and cross-checked across these sources (retrieved 2026-07-28):

  • HomeAdvisor — Average cost $1,900; typical range $977-$2,822; full project range $200-$5,800. By type installed: hand pump $150-$1,500, submersible well pump $275-$1,550, shallow jet pump $230-$1,000, deep well jet pump $440-$1,200, solar well pump $1,800-$6,500, constant pressure pump $2,000-$5,000, windmill water pump $5,000-$21,000. Labor $250-$1,000 ($45-$150/hour). Permits $50-$200. Pressure tank replacement $800-$3,800.
  • Angi — Normal range $977 - $2,822; average $1,900; low end $200, high end $5,800. Well pump prices (unit only) $400 to $6,500. By type: hand pump $400-$1,500, submersible well pump $1,000-$2,500+, shallow jet pump $450-$1,500, deep well jet pump $800-$2,200+, solar well pump $1,800-$6,500+, constant-pressure pump $1,300-$4,000+, windmill water pump $5,000-$21,500+. By well size: under 25 feet $400-$3,000+, 25-150 feet $1,200-$5,500+, over 150 feet $2,000-$10,000+. Labor $250-$1,000, typical rates $45-$150/hour. Electrical wiring $50-$100/hour.
  • Bob Vila — National average $1,785; typical range $942 to $2,629. By type: jet pumps $100 to $745 (shallow well jet pumps $100 to $500, deep well jet pumps $675 to $745), submersible pumps $250 to $1,200, solar pumps $2,000 to $4,000, hand pumps $150 to $2,000, windmill pumps $4,200 to $19,600, constant-pressure pumps $2,000 to $5,000. Labor $250 to $800 (up to $1,000 for complex jobs), $45-$150/hour. Submersible pump pipework $250-$2,500. Pressure tank replacement $800-$3,800. Electrician services $162-$525. Repairs $300-$1,300.
  • HomeGuide — National average cost $1,800; minimum cost $200; maximum cost $20,000; average range $1,000 to $2,500. Well pump replacement costs $400 to $2,500 on average. By type installed: submersible pump $1,000-$2,500, jet pump (deep well) $500-$1,400, jet pump (shallow well) $400-$1,000, constant pressure pump $2,000-$5,000, hand pump $200-$2,000, solar pump $1,500-$6,500, windmill water $4,000-$20,000. Plumbing labor $250-$800 (can exceed $1,000). Electrician labor $50-$130/hour. Well pump parts: pressure tank $500-$1,000, pressure switch $25-$100, tank bladder $50-$100, pump motor $500-$1,000, booster pump $1,000-$2,000+. Well pump lifespan 10-15 years.
  • This Old House — "The cost of replacing a well pump typically ranges from $900-$2,500", depending on pump type, well depth, and installation complexity. Pump unit only (via The Home Depot), not including installation: $200-$500 typically. By type (unit only): shallow well jet pump $200, deep-well jet pump $300, submersible well pump $500. Submersible pumps typically serve wells 200-300 feet deep or more; shallow well jet pumps serve wells under 25 feet; deep-well jet pumps serve wells beyond 25 feet, sometimes past 100 feet. Quote from plumbing and heating expert Richard Trethewey: constant on-and-off pump cycling 'isn't good for pump equipment' and can strain the motor over time.

HomeAdvisor and Angi (Angi owns HomeAdvisor and the two share cost-data infrastructure) report matching figures: national average $1,900, typical range $977-$2,822, full project range $200-$5,800. Bob Vila reports a close but independently-derived figure ($1,785 average, $942-$2,629 typical range), and HomeGuide reports a $1,800 average with a far wider ceiling ($20,000) that reflects outlier eco-pump (solar/windmill) and very-deep-well installs rather than a typical job. This Old House's simpler $900-$2,500 range sits inside the HomeAdvisor/Angi typical band. national_average_usd ($1,900), range_low_usd/range_high_usd ($200-$5,800), and project_low_usd/project_high_usd ($977-$2,822) are all taken verbatim from the matching HomeAdvisor/Angi figures, which is also the tightest, most-corroborated cluster across the five sources. by_type figures (installed cost per pump type) come from HomeAdvisor's breakdown, which is directionally consistent with Angi's and HomeGuide's per-type tables even though the exact dollar bands differ by source. This Old House's per-type numbers ($200/$300/$500) are equipment-only (via The Home Depot) rather than installed cost, so they aren't used in by_type but are cited in sources below. Submersible pumps are generally used for wells 200-300+ feet deep and are quieter/more efficient; jet pumps sit above ground and are used for shallower wells (This Old House).