Asphalt Driveway Cost: $3,149–$9,000 (Average $5,340) in 2026
Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·5 min read·4 sources Quick answerQuick answer: A new asphalt driveway typically costs $3,149 to $9,000, averaging about $5,340 nationally. Per square foot, expect $7 to $13 for new installation and $8 to $15 for full replacement. Size, asphalt type, site prep, and location drive most of the difference.
- ✓The national average cost to install an asphalt driveway is $5,340, with most projects falling between $3,149 and $9,000 (HomeAdvisor, Angi, Bob Vila).
- ✓Per square foot, new asphalt installation runs $7 to $13, while full replacement costs $8 to $15 (HomeAdvisor, Bob Vila).
- ✓A standard 600 sq ft driveway typically costs $3,600 to $7,028 depending on site conditions (Today's Homeowner, Bob Vila).
- ✓Specialty finishes like stamped or colored asphalt cost $12 to $17 per square foot, well above the $7 to $13 for standard hot mix (Bob Vila, HomeAdvisor).
How much does asphalt driveway cost?
National average
$5,340
total project
Typical range
$3,149–$9,000
Most projects
Whole project
$3,600–$7,028
Advertisement · 728 × 90
Cost by material / type
| Type | Low | High |
|---|
| standard/hot mix asphalt (per sq ft) | $7 | $13 |
| recycled/reclaimed asphalt (per sq ft) | $6 | $9 |
| porous asphalt (per sq ft) | $8 | $15 |
| stamped or colored asphalt (per sq ft) | $12 | $17 |
| heated asphalt driveway (per sq ft) | $12 | $25 |
| driveway replacement (per sq ft) | $8 | $15 |
| resurfacing/overlay (per sq ft) | $3 | $7 |
What affects the cost?
- Driveway size and total square footage (Today's Homeowner, HomeAdvisor)
- Asphalt mix/type chosen — standard hot mix runs $7-$13/sq ft while stamped or colored asphalt runs $12-$17/sq ft (Bob Vila, HomeAdvisor)
- Site preparation and grading, about $5-$10 per sq ft (HomeAdvisor)
- Labor, roughly $5-$7 per sq ft (Bob Vila)
- Demolition and removal of an existing driveway, about $1-$2 per sq ft (HomeAdvisor)
- Geographic location — state averages range from about $2,050 in Florida to $13,500 in California (Bob Vila)
- Tree removal if it's in the way, $750-$1,200 (Today's Homeowner)
- Permits, typically $50-$200 (Today's Homeowner)
- Post-installation sealcoating, about $1.25-$1.50 per sq ft for materials and labor (Angi)
Why does an asphalt driveway cost so much?
Cost mainly comes down to square footage and asphalt type. A full project typically runs $3,149 to $9,000, averaging around $5,340 nationally — a synthesized range spanning the low end reported by HomeAdvisor and Angi to the high end of Bob Vila’s typical range (HomeAdvisor, Angi, Bob Vila). Per square foot, new installation costs $7 to $13, while a full replacement of an old driveway runs $8 to $15 (HomeAdvisor, Bob Vila) — demolition and removal of the old surface is typically billed separately, at about $1 to $2 per square foot (HomeAdvisor). A standard 600 sq ft driveway lands around $3,600 to $7,028 depending on site prep needs (Today’s Homeowner, Bob Vila). The asphalt mix itself matters too: recycled or reclaimed asphalt is the cheapest option at $6 to $8.75 per square foot (Today’s Homeowner, HomeAdvisor), standard hot mix sits in the middle at $7 to $13 (Bob Vila, HomeAdvisor), and specialty finishes cost more — porous runs $8 to $15 per square foot and stamped or colored asphalt runs $12 to $17 per square foot (Bob Vila, HomeAdvisor). Labor typically adds $5 to $7 per square foot on top of materials (Bob Vila).
What affects the cost?
A few factors explain most of the gap between a $3,000 driveway and one that costs $9,000 or more:
- Driveway size. More square footage means more material and labor hours, and costs scale up quickly past 800-1,000 sq ft (HomeAdvisor).
- Asphalt type. Recycled or reclaimed asphalt runs $6-$8.75 per sq ft, standard hot mix $7-$13, porous $8-$15, and stamped or colored asphalt $12-$17 (Today’s Homeowner, HomeAdvisor, Bob Vila).
- Site preparation and grading. Uneven ground, drainage issues, or a sloped lot can add $5-$10 per sq ft (HomeAdvisor).
- Demolition and removal. Tearing out an existing driveway before repaving adds roughly $1-$2 per sq ft (HomeAdvisor).
- Obstacles. Removing a tree in the way can run $750-$1,200, and permits typically add $50-$200 (Today’s Homeowner).
- Region. State averages vary widely, from around $2,050 in Florida up to $13,500 in California (Bob Vila).
- Labor rates. Labor alone accounts for about $5-$7 per sq ft of the total in most markets (Bob Vila).
How to lower your asphalt driveway cost
- Choose standard hot mix over specialty finishes. Skipping stamped, colored, or heated asphalt saves $5 or more per square foot compared to those premium options (Bob Vila, HomeAdvisor).
- Consider recycled asphalt. It’s the cheapest mix option at $6-$8.75 per square foot and holds up well for typical residential use (Today’s Homeowner, HomeAdvisor).
- Resurface instead of replace if the base is sound. An overlay costs $3-$7 per square foot versus $8-$15 for full replacement, a significant savings when the existing base doesn’t need to be torn out (HomeAdvisor, Today’s Homeowner).
- Handle site prep issues before quoting. Clearing minor obstacles yourself, where safe, can avoid some of the $5-$10 per sq ft grading premium.
- Budget for sealcoating rather than skipping it. At $1.25-$1.50 per square foot, sealing every few years is far cheaper than premature repairs or an early replacement (Angi).
Prices vary by region, driveway size, and asphalt type, so treat the figures above as a planning budget. Get two or three local quotes, and confirm what’s included (site prep, demolition, permits) before comparing bids.
Advertisement · 336 × 280
Frequently asked questions
How much does a new asphalt driveway cost on average?+
The national average is about $5,340, with most homeowners paying between $3,149 and $9,000 depending on driveway size, asphalt type, and site conditions (HomeAdvisor, Angi, Bob Vila).
How much is asphalt paving per square foot?+
Overall paving runs about $7 to $15 per square foot including labor and materials, with new installation on the lower end at $7 to $13 per square foot (Angi, Bob Vila, HomeAdvisor).
What's the cost difference between standard asphalt and stamped or colored asphalt?+
Standard hot mix asphalt costs $7 to $13 per square foot, while stamped or colored asphalt costs $12 to $17 per square foot (Bob Vila, HomeAdvisor).
Is replacing an asphalt driveway more expensive than resurfacing it?+
Yes. Full replacement runs $8 to $15 per square foot, while resurfacing or overlaying an existing driveway costs $3 to $7 per square foot (HomeAdvisor, Today's Homeowner).
What drives asphalt driveway cost the most?+
Driveway size, the asphalt mix chosen, site preparation and grading ($5 to $10 per square foot), and labor ($5 to $7 per square foot) are the biggest factors, along with your region (HomeAdvisor, Bob Vila).
How much does sealing an asphalt driveway cost?+
Sealcoating, recommended about six months after installation and then every three to five years, costs roughly $1.25 to $1.50 per square foot for materials and labor (Angi).
Sources
Figures synthesized and cross-checked across these sources (retrieved 2026-07-24):
- Today's Homeowner — National average per sq ft $6-$9 (low-end $3-$5, high-end $10-$15). Standard 600 sq ft driveway $3,600-$5,400. By size: single-car 10x18 ft $1,080-$1,620; single-car 12x20 ft $1,440-$2,160; double-car 20x28 ft $3,360-$5,040; double-car 24x32 ft $4,600-$6,910. By type per sq ft: cold mix $3-$6; reclaimed $3-$6; hot mix $6-$10; porous $10-$15; stamped $12-$20; colored $12-$20; heated $12-$28. By project type per sq ft: repair $1-$3; resurfacing $5-$7; new construction $7-$13; replacement $8-$15. Labor about $150/hour; tree removal $750-$1,200; permits $50-$200; sealcoating $0.20-$0.30 per sq ft.
- HomeAdvisor — Average $5,340; range $3,149-$7,541 (broader range $1,500-$14,000). New installation $7-$13/sq ft; replacement $8-$15/sq ft; overlay $3-$7/sq ft. By size: 200 sq ft $1,400-$2,600; 400 sq ft $2,800-$6,000; 600 sq ft $4,200-$9,000; 800 sq ft $5,600-$10,400; 1,000 sq ft $7,000-$15,000; 1,200 sq ft $8,400-$18,000; 1,500 sq ft $10,500-$22,500. By type: standard $7-$13/sq ft; porous $3-$8/sq ft; recycled $6.20-$8.75/sq ft; stamped/colored $10-$17/sq ft; heated blacktop $12-$25/sq ft. Labor $5-$7/sq ft; site prep $5-$10/sq ft; demolition/removal $1-$2/sq ft; material $100-$200/ton.
- Bob Vila — National average $4,740; typical range $4,200-$9,000. Overall paving $7-$15/sq ft including minimal grading; new installation $7-$13/sq ft; replacement $8-$15/sq ft. 600 sq ft surface $2,500-$7,028. By type: hot mix asphalt $100-$200/ton; cold mix $10-$50/bag; recycled/reclaimed $10-$20/ton; porous $8-$15/sq ft; stamped or colored $12-$17/sq ft. Asphalt grade materials only: base I-2 $1-$2/sq ft; top I-5 $1-$4/sq ft; commercial top I-4 $3-$5/sq ft. Labor $5-$7/sq ft. State examples: California $5,050-$13,500; Florida $2,050-$5,400; Texas $4,200-$10,250.
- Angi — Professional installation $3,149-$7,541; average $5,340. $7-$15 per sq ft including labor and materials. Sealing (recommended about six months after installation, then every 3-5 years) costs $1.25-$1.50 per sq ft for materials and labor.
National average and range reflect whole-project figures from HomeAdvisor and Angi, which report identical underlying data: average $5,340, typical range $3,149-$7,541. Bob Vila reports a lower average ($4,740) but a wider typical range ($4,200-$9,000). Today's Homeowner frames a standard 600 sq ft driveway at $3,600-$5,400. The combined range used here ($3,149-$9,000) is a synthesized range: it spans the low end from HomeAdvisor/Angi's typical range to the high end of Bob Vila's typical range -- no single source reports this exact combined figure. project_low_usd/project_high_usd ($3,600-$7,028) is a separate, narrower synthesis specifically for a standard 600 sq ft driveway: low end from Today's Homeowner's 600 sq ft figure, high end from Bob Vila's 600 sq ft figure ($2,500-$7,028) -- do not confuse this with the broader HomeAdvisor/Angi professional-installation range ($3,149-$7,541), which describes a different, unspecified project size. Per-square-foot figures agree closely across sources: new installation $7-$13/sq ft, replacement $8-$15/sq ft, resurfacing/overlay $3-$7/sq ft. by_type entries are per-square-foot rates, not total project costs -- multiply by driveway square footage to estimate a project total. Figures generally include materials and standard installation labor; site prep, tree/obstacle removal, permits, demolition/removal, and sealcoating are frequently quoted as separate add-ons -- replacement figures ($8-$15/sq ft) do not already include demolition/removal ($1-$2/sq ft), which is a distinct line item. Recycled/reclaimed asphalt ($6-$8.75/sq ft) is a synthesized range: low end from Today's Homeowner's reclaimed figure ($3-$6/sq ft), high end from HomeAdvisor's recycled figure ($6.20-$8.75/sq ft). Bob Vila's recycled/reclaimed figure ($10-$20/ton) is quoted per ton, not per square foot, so it is not used for this per-sq-ft figure.