CostGuideHQ

Garage Door Panel Replacement Cost: $220–$3,400 (Average $550) per Panel in 2026

Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·6 min read·6 sources·US national averages, USD
Quick answerQuick answer: Garage door panel replacement costs $220 to $3,400 per panel, averaging about $550 for a typical single-panel swap. Sectional panels run cheapest at $300 to $900; glass, side-sliding, and French-style panels cost more. Replacing several panels or matching an older, discontinued door often costs enough that a full new door becomes the better value.
  • A typical single garage door panel replacement costs $220 to $3,400, averaging about $550 (Angi).
  • Sectional panels — the most common style — cost $300 to $900 installed, the cheapest option (HomeGuide).
  • Replacing 2 to 3 panels runs $1,720 to $2,580, and a full single-car panel set costs $3,440 (This Old House).
  • Once panel repairs approach half the price of a new door, full replacement is usually the better value — a new single-car door installs for $1,199 to $1,674 (This Old House).

How much does garage door panel replacement cost?

National average
$550
per panel
Typical range
$220–$3,400
Most projects
High end
$3,400+
Premium / complex
Advertisement · 728 × 90

Cost by material / type

TypeLowHigh
sectional$300$900
glass$400$1,000
side-sliding$300$1,000
tilt-up (single large panel)$400$1,000
French (single large panel)$500$1,200
Estimate your cost
—

Rough estimate only — get local quotes for exact pricing.

What affects the cost?

  • Number of panels needed — a single-panel swap averages $860, replacing 2-3 panels runs $1,720-$2,580, and a full single-car panel set costs $3,440 (This Old House)
  • Door style — sectional panels cost $300-$900 installed, glass and side-sliding panels run $400-$1,000+, and French-style single-large-panel doors reach $500-$1,200 (HomeGuide)
  • Material — steel is the least expensive panel material at roughly $500-$900 installed (This Old House); full-door material pricing shows the same order, with steel running $650-$3,200 versus wood at $900-$4,500 (Bob Vila)
  • Labor — panel labor runs $200-$500 (Angi), or roughly $63 per hour with most single-panel jobs taking 1-2 hours (This Old House)
  • Extent of damage and repair type — HomeAdvisor's per-part panel figure is $250-$1,000, its 'one panel' door-type figure is $400-$1,200, and Fixr's panel line spans $150-$1,000 for a cosmetic patch versus a full section swap
  • Removal and disposal of the old panel — hauling away damaged sections typically adds about $370 to the bill (This Old House)
  • Matching an older or discontinued door — a discontinued color, finish, or style can be hard to match, sometimes forcing replacement of more panels than planned, or the whole door (HomeGuide)
  • Whether repair still makes sense — once panel costs exceed roughly half the price of a new door, replacement is usually the better value; a new single-car door installs for $1,199-$1,674 (This Old House) or $700-$3,500 overall (HomeGuide)
  • Timing — emergency or rush service adds $100-$250 on top of standard rates (This Old House)

How much does it cost to replace a garage door panel?

A single panel typically costs $220 to $3,400, averaging about $550 (Angi) — HomeGuide’s $300 to $900 per-panel range lands right in the middle of that. The type of panel matters most: sectional panels, the most common style, cost $300 to $900 installed, while glass, side-sliding, and tilt-up panels run $400 to $1,000 or more, and French-style single-large panels reach $500 to $1,200 (HomeGuide). This Old House reports notably higher figures — a $860 average for one panel, scaling up to a blended $2,150 average across its single, multi-panel, and full-set tiers — which likely reflects a more comprehensive labor, hardware, and disposal estimate rather than a fundamentally different repair. Either way, panel replacement is far cheaper than replacing the whole door, which runs $700 to $3,500 or more (HomeGuide).

Does it cost more to replace one panel, or several at once?

Per panel, no — it gets cheaper as you add panels, since the contractor is already on-site and some labor and hardware work is shared. This Old House breaks this out clearly: a single panel averages $860, replacing 2 to 3 panels runs $1,720 to $2,580, and swapping a full single-car set of panels costs $3,440. That’s a useful way to think about storm damage or a multi-panel dent — the second and third panel add proportionally less to the bill than the first. Angi’s reported high end, $3,400 for a “higher-end model,” lines up closely with This Old House’s full-set figure, suggesting that ceiling holds regardless of whether you’re paying for one premium panel or a full set of standard ones.

What else affects the price — material, style, and labor?

  • Material. Steel is the least expensive option, at roughly $500 to $900 installed (This Old House). “Steel is the most common option available and offers durability with minimal maintenance required,” says Jon Russell, director of systems at Precision Garage Door Service, a Neighborly company (Bob Vila). Wood, by contrast, costs considerably more for the same size door.
  • Labor. Panel labor runs $200 to $500 (Angi), or roughly $63 per hour with most single-panel jobs done in 1 to 2 hours (This Old House).
  • Extent of the damage. HomeAdvisor’s panel figure runs $250 to $1,000 by repair part, or $400 to $1,200 by door type; Fixr’s panel line spans $150 to $1,000, depending on whether it’s a cosmetic patch or a full section swap.
  • Removal and disposal. Hauling away the damaged section typically adds about $370 to the total (This Old House).
  • Timing. Emergency or rush service adds $100 to $250 on top of standard rates (This Old House).

Is it cheaper to replace just the panel, or the whole door?

Replace the panel if the damage is limited to one or two sections and the rest of the door — tracks, springs, opener — still works. Once panel repairs start approaching half the price of a new door, though, full replacement usually wins. A new single-car garage door installs for $1,199 to $1,674 (This Old House) or $700 to $3,500 overall (HomeGuide), which can undercut the cost of replacing a full set of aging panels, especially if the door is more than 15 years old or the manufacturer’s color and style are discontinued and hard to match (HomeGuide).

Prices vary by region, door style, and how well the replacement panel needs to match your existing door, so treat the figures above as a planning budget. Get a couple of quotes, and ask upfront whether matching your panel’s color and finish is realistic before you commit to a repair instead of a full door.

Advertisement · 336 × 280

Frequently asked questions

How much does it cost to replace a garage door panel?
A single panel typically costs $220 to $3,400, averaging about $550 (Angi). HomeGuide reports a similar $300 to $900 per-panel range, while This Old House's figures run higher — averaging $2,150 across a $860-$3,440 span — reflecting a more comprehensive labor and hardware estimate.
Does replacing multiple panels cost proportionally more?
Not exactly — it's cheaper per panel. This Old House reports 2-3 panels at $1,720 to $2,580 (versus $860 for one), and a full single-car panel set at $3,440, since the contractor is already on-site and hardware adjustment is shared across the job.
What's the cheapest type of garage door panel to replace?
Sectional panels are the most common and least expensive, at $300 to $900 installed (HomeGuide). Glass, side-sliding, and tilt-up panels run $400 to $1,000 or more, and French-style single-large panels cost $500 to $1,200.
Is steel or wood cheaper for a replacement panel?
Steel. Basic steel panels cost roughly $500 to $900 installed (This Old House) — the least expensive material — while wood costs considerably more. "Wood provides a genuine carriage-door appearance, but it is considerably more expensive compared to steel doors," says Jon Russell, director of systems at Precision Garage Door Service (Bob Vila).
Can I match a new panel to my older garage door?
Usually, if the door isn't too old. But if the manufacturer's color, finish, or style has been discontinued, matching can be difficult, and you may end up replacing more panels than planned, or the whole door (HomeGuide).
When is it cheaper to replace the whole garage door instead of a panel?
Once panel repairs start approaching half the price of a new door, full replacement usually wins. A new single-car garage door installs for $1,199 to $1,674 (This Old House) or $700 to $3,500 overall (HomeGuide), which can come in below the cost of replacing a full set of panels.
How much does labor cost for a panel replacement?
Labor runs $200 to $500 (Angi), or about $63 per hour (This Old House). Most single-panel jobs take 1 to 2 hours, though multiple panels or a hard-to-access door can stretch that to half a day.
Why do garage door panel cost estimates vary so much between sources?
HomeGuide, Angi, HomeAdvisor, and Fixr cluster around $150 to $1,200 for a single panel, but This Old House reports $860 to $3,440 — likely because its estimates are built on more comprehensive contractor-quote data (hardware transfer, disposal, and rebalancing included) rather than a bare parts-and-labor swap.

Sources

Figures synthesized and cross-checked across these sources (retrieved 2026-07-28):

  • HomeGuide — Garage door panel replacement costs $300-$900 per panel installed (material $150-$400, labor $150-$500). By door style, average cost per panel: sectional $300-$900, glass panels $400-$1,000+, side-sliding panels $300-$1,000+, tilt-up door (single large panel) $400-$1,000+, French door (single large panel) $500-$1,200+. Full garage door replacement $700-$3,500. Related repair costs: sensor $85-$100, cables/chain $85-$200, opener repair $75-$300, spring $120-$350.
  • Angi — Normal range $350-$900, average $550, low end $220, high end $3,400. Panel only (material) $150-$800; panel plus related parts (springs, cables, rollers, sensors, chains) $150-$550. Labor $200-$500. By door style average cost: sectional $250-$500, roll-up $150-$400, tilt-up $400-$1,900 (body text cites $400-$1,400 for canopy and $700-$1,900 for up-and-over), side-sliding $250-$3,000 (body text: $250-$1,000+, full single-panel door $400-$3,000), side-hinged $200-$1,600 (body text: $200-$800 per side). Dent repair example about $200.
  • This Old House — Low end $860, average $2,150, high end $3,440. Single panel replacement $860 (hardware transfer + basic labor); multiple panel replacement (2-3 panels) $1,720-$2,580; full set panel replacement (single-car garage) $3,440. Basic steel panels $500-$900 depending on size; insulated steel adds 10%-20%. Labor about $63/hour; single-section swaps take 1-2 hours. Old-panel disposal averages $370. Rush/emergency fees $100-$250; track/frame/spring rebalancing $147-$300. New single-car garage door installation $1,199-$1,674. ROI: panel replacement 103%-194% ($860-$3,440 per panel), full door replacement 268% ($4,672 for a steel door), per The Journal of Light Construction 2025 Cost vs. Value Report.
  • HomeAdvisor — Cost by part: panel $250-$1,000 (springs $180-$350, opener $100-$500, cables $100-$400, track $5-$400, glass $100-$200). Cost by door type: one panel $400-$1,200, tilt-up $150-$1,000, roll-up $300-$800, carriage $1,000-$10,000, sectional $150-$400. Average garage door repair $265 (normal range $155-$379); average full door replacement $1,223. Labor $75-$150 per hour, most homeowners pay $150-$450 for labor.
  • Fixr — Garage door panel repair (cosmetic patch/cover) $150-$500. Replacement cost table: panel $150-$1,000 (sensor $100-$150, cable $100-$200, coils/springs $120-$350, track $150-$250, circuit board $150-$400, strut $200-$500, frame $200-$600, opener $300-$940). Overall garage door repair averages $250, range $150-$350.
  • Bob Vila — Garage door size cost ranges from $500 (1-car) to $7,200 (3-car, three single doors). By material: aluminum $600-$2,900, wood $900-$4,500, steel $650-$3,200, vinyl $800-$2,500, composite $650-$4,800. Quote: "Steel is the most common option available and offers durability with minimal maintenance required," says Jon Russell, director of systems at Precision Garage Door Service, a Neighborly company. "Wood provides a genuine carriage-door appearance, but it is considerably more expensive compared to steel doors."

HomeGuide, Angi, HomeAdvisor, and Fixr cluster around a $150-$1,200 band for a single replacement panel (HomeGuide $300-$900 per panel; Angi normal range $350-$900, average $550; HomeAdvisor $250-$1,000 by repair part or $400-$1,200 by door type for 'one panel'; Fixr $150-$1,000). This Old House reports a materially different framework: $860 average for a single panel alone, scaling to $1,720-$2,580 for 2-3 panels and $3,440 for a full single-car panel set, with a blended $2,150 'average' across those tiers — this reflects Homewyse contractor-quote data with more comprehensive labor, hardware, and disposal built in, not a directly comparable single-panel base price. Angi's own high end ($3,400, for a higher-end/oversized panel) lines up closely with This Old House's full-set figure ($3,440), so the two sources agree at the top of the range even though they disagree on what a 'typical' single panel costs. national_average_usd is anchored to Angi's cited average ($550), which sits inside HomeGuide's per-panel range and close to the midpoint of HomeAdvisor's door-type figure; range_low_usd uses Angi's cited low end ($220, an inexpensive small panel); range_high_usd uses Angi's cited high end ($3,400), corroborated independently by This Old House's full-panel-set figure. by_type figures come from HomeGuide's door-style breakdown, the most consistent per-panel table across sources. Every source agrees that matching an older or discontinued door can be difficult, and that extensive multi-panel damage often makes full door replacement the better value than piecemeal panel repairs.