CostGuideHQ

Garage Door Spring Replacement Cost: $120–$540 (Average $250) in 2026

Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·6 min read·5 sources·US national averages, USD
Quick answerQuick answer: Garage door spring replacement costs $150 to $350 for most single-door jobs, averaging about $250 nationally. Torsion springs run $75 to $150 each installed and last longer; extension springs cost $50 to $100 each. Always replace both springs together, and never DIY the job — the tension involved can cause serious injury.
  • A typical single-door spring replacement costs $150 to $350, averaging about $250 nationally (HomeAdvisor, Angi, Bob Vila).
  • Torsion springs cost $75 to $150 each installed and last 8 to 15 years; extension springs cost $50 to $100 each and last 7 to 12 years (HomeAdvisor, Bob Vila).
  • Replacing springs on two single-car doors runs $275 to $425, and pros almost always replace both springs on a door at the same time (HomeAdvisor).
  • Every major source warns against DIY replacement — the springs stay under enough tension to cause serious injury (Angi, Bob Vila, HomeGuide).

How much does garage door spring replacement cost?

National average
$250
per repair
Typical range
$120–$540
Most projects
High end
$540+
Premium / complex
Advertisement · 728 × 90

Cost by material / type

TypeLowHigh
torsion spring (per spring)$75$150
extension spring (per spring)$50$100
single door, both springs$150$350
two single doors (four springs)$275$425
spring + cable replaced together$175$450
convert extension to torsion$400$800
Estimate your cost
—

Rough estimate only — get local quotes for exact pricing.

What affects the cost?

  • Spring type — torsion springs cost $75-$150 per spring installed, while extension springs run $50-$100 per spring (HomeAdvisor, Angi, Bob Vila)
  • Number of springs and doors — a single door's pair of springs runs $150-$350 total, while replacing springs on two single-car doors costs $275-$425 (HomeAdvisor)
  • Door type — sectional and roll-up doors typically use torsion springs at $75-$150 each, while single-panel tilt-up doors often use cheaper extension springs at $50-$100 each (HomeAdvisor, HomeGuide)
  • Bundling with cable work — replacing a spring and cable together runs $175-$450, versus $75-$200 for cables alone (Bob Vila)
  • Converting spring systems — switching from extension to torsion springs for better safety and longevity costs $400-$800 (HomeGuide, HomeAdvisor)
  • Spring cycle rating — torsion springs are rated for 10,000-20,000 cycles (8-15 years) versus roughly 5,000-15,000 cycles (4-12 years) for extension springs across sources, and higher-cycle springs cost more upfront but need replacing less often (HomeGuide, This Old House, Bob Vila)
  • Labor rates — residential spring replacement runs $75-$150 for a 1-2 hour job, while commercial-grade doors run $150-$300 (HomeAdvisor)
  • Emergency or after-hours service — night, weekend, and holiday calls add a premium on top of standard rates (HomeAdvisor, HomeGuide)

How much does it cost to replace a garage door spring?

Expect to pay $150 to $350 for a typical single-door job, averaging about $250 nationally (HomeAdvisor, Angi, Bob Vila) — all three land on almost the exact same number, which is a strong signal for what a straightforward repair actually costs. This Old House reports higher figures, $300 to $540 installed with a $420 average, which likely reflects its contractor-quote methodology assuming more labor than a basic swap rather than a fundamentally different job. HomeGuide’s numbers split the difference by spring type: $150 to $350 for torsion springs and $120 to $200 for extension springs. However you slice it, spring replacement is one of the cheaper garage door repairs — a full door replacement runs $700 to $3,500 or more by comparison (HomeGuide, Angi).

Torsion vs. extension springs: what’s the real cost difference?

Torsion springs cost more upfront — $75 to $150 each installed — but last noticeably longer, rated for 10,000 to 20,000 cycles, or about 8 to 15 years of typical use (HomeAdvisor, Bob Vila). Extension springs cost less, $50 to $100 each, but wear out sooner, lasting roughly 7 to 12 years (HomeGuide puts it at 4 to 10 years, a slightly wider estimate). Torsion springs mount on a horizontal shaft above the door and are considered the safer design since they stay contained inside the shaft if they fail; extension springs run alongside the tracks and can snap with more force. “The spring is actually the muscle that helps pick the door up,” explains general contractor Tom Silva of This Old House — which is exactly why the type you have determines both your replacement cost and how the job gets done. Converting from extension to torsion springs costs $400 to $800 (HomeGuide, HomeAdvisor, Angi).

What else moves the price — quantity, door type, and add-ons?

  • Number of doors. A single door’s pair of springs runs $150 to $350 total, while springs on two separate single-car doors cost $275 to $425 (HomeAdvisor).
  • Double vs. single door springs. A double door needs a larger spring, adding $15 to $30 per spring over single-door pricing (HomeAdvisor, Angi, Bob Vila).
  • Door type. Sectional and roll-up doors typically use torsion springs ($75 to $150 each); older single-panel tilt-up doors often use cheaper extension springs ($50 to $100 each) (HomeAdvisor, HomeGuide).
  • Bundled cable work. Cables often wear out alongside springs. Replacing a spring and cable together runs $175 to $450, versus $75 to $200 for cables alone (Bob Vila).
  • Labor rate. Residential jobs run $75 to $150 in labor for a 1- to 2-hour visit; commercial-grade doors cost $150 to $300 (HomeAdvisor).
  • Timing. Emergency, weekend, or holiday calls add a premium on top of standard rates (HomeAdvisor, HomeGuide).

Why do professionals discourage DIY spring replacement?

Because the springs stay under enough tension to seriously injure someone even after the door is closed. Bob Vila and HomeAdvisor both flag spring work as one of the few garage door repairs pros insist on doing themselves rather than talking homeowners through — improper tension release can cause broken bones, and a poorly balanced door afterward can strain the opener or damage the tracks. It’s also not a job where cutting corners saves much: a professional repair only averages $250, and getting it wrong can turn into a bigger bill (a new opener, a warped track, or a full door replacement). If you want to save money, the safer levers are getting multiple quotes, scheduling during regular business hours to avoid emergency surcharges, and sticking with extension springs if your door and budget allow it — not doing the tension work yourself.

Prices vary by region, door weight, and how many springs and doors need service, so treat the figures above as a planning budget. Get a couple of quotes from licensed technicians, and confirm whether the price includes replacing both springs and inspecting the cables.

Advertisement · 336 × 280

Frequently asked questions

How much does it cost to replace a garage door spring?
Most single-door jobs cost $150 to $350, averaging about $250 nationally (HomeAdvisor, Angi, Bob Vila). This Old House reports higher installed figures, $300 to $540, averaging $420 — likely reflecting a more comprehensive labor estimate rather than a directly comparable base job.
What's the difference between torsion and extension springs?
Torsion springs mount horizontally above the door and cost $75 to $150 each installed; they last 8 to 15 years (10,000 to 20,000 cycles). Extension springs run alongside the tracks and cost $50 to $100 each; they last 7 to 12 years (HomeAdvisor, Bob Vila).
Do I need to replace one spring or both?
Both. Springs wear down together, so professionals replace both springs on a door in the same visit even if only one has broken — it keeps the door balanced and avoids a second service call soon after (Angi).
Does a double garage door cost more to fix than a single door?
Yes, a bit. Double-door springs cost $15 to $30 more per spring than single-door springs, and replacing springs on two separate single-car doors runs $275 to $425 total (HomeAdvisor).
How long do garage door springs last?
Torsion springs are rated for 10,000 to 20,000 cycles, or roughly 8 to 15 years of typical use. Extension springs last less — 7 to 12 years — since they have a lighter-duty design (HomeGuide, Bob Vila, This Old House).
Why is DIY garage door spring replacement so dangerous?
A garage door spring stores enough tension to lift 100+ pounds of door, and releasing that tension improperly can cause serious injury. Every source we checked recommends hiring a trained technician with the right tools rather than attempting it yourself (HomeAdvisor, Bob Vila).
Is it worth converting from extension to torsion springs?
It can be. Converting costs $400 to $800 upfront (HomeGuide, HomeAdvisor, Angi), but torsion springs last longer and stay contained inside a shaft when they break, instead of snapping loose like an extension spring can.
Why do garage door spring cost estimates vary so much between sources?
HomeAdvisor, Angi, and Bob Vila all cluster around a $250 average for a single-door job, but This Old House reports $300 to $540 — likely because its contractor-quote data assumes more labor than a straightforward single-spring swap.

Sources

Figures synthesized and cross-checked across these sources (retrieved 2026-07-28):

  • HomeGuide — Torsion spring replacement $150-$350; torsion spring and bar replacement $200-$400; extension spring replacement $120-$200; spring and cable replacement $200-$500; convert extension to torsion $400-$800+; annual maintenance $40-$80. Torsion springs last 7-14 years (10,000-20,000 cycles); extension springs last 4-10 years (5,000-15,000 cycles). By door type: roll-up sectional $150-$350, single-panel tilt-up $120-$200, insulated doors $250-$400, double doors $300-$600, carriage-style $200-$450. Full garage door replacement $700-$3,500.
  • This Old House — Low end $300, average $420, high end $540. Extension spring $300-$400 installed (parts alone $20-$60); torsion spring $350-$540 installed (parts alone $80-$120). Torsion springs last 8-15 years; extension springs last 7-12 years; both roughly 10,000-20,000 cycles. Full garage door replacement $970-$1,580. Quote: general contractor Tom Silva explains, "The spring is actually the muscle that helps pick the door up."
  • HomeAdvisor — Normal range $150-$350, average $250, broader range $75-$500. Torsion springs $75-$150 per spring installed (parts alone $30-$100); extension springs $50-$100 per spring installed (parts alone $15-$45). Single door (two springs) $150-$350; double-door springs cost $15-$30 more per spring; two single doors (four springs) $275-$425. Sectional/roll-up springs $75-$150 each; tilt-up extension springs $50-$100 each. Commercial-grade spring replacement $150-$300. Cable replacement $75-$200. Convert extension to torsion $400-$800. Labor $75-$150 residential (1-2 hours), $150-$300 commercial. Torsion spring lifespan 10,000-20,000 cycles (8-15 years); extension 8,000-15,000 cycles (7-12 years).
  • Angi — Normal range $150-$350, average $250, low end $75, high end $500. Extension spring $50-$100; torsion spring $75-$150; convert torsion to extension $250-$500; convert extension to torsion $400-$800. By door type per spring: sectional $75-$150, tilt-up $50-$100, roll-up $75-$150. By number of doors: one $150-$350, two $275-$425, three $350-$700. Double-door springs cost $15-$30 more per spring. Residential labor $75-$150, commercial $150-$300. Full garage door replacement $750-$1,700. Springs last 10,000-20,000 cycles; torsion every 8-15 years, extension every 7-12 years.
  • Bob Vila — Typical cost $150-$350, average $250, most homeowners paying $250. Torsion springs cost $75-$150 to install (10,000-20,000 cycles, 8-15 years); extension springs cost $50-$100 each to replace (8,000-15,000 cycles, 7-12 years). Double-door extension springs cost $15-$30 more per spring than single-door. Roll-up doors (two torsion springs) $150-$300. Cable replacement $75-$200, or $175-$450 if replaced with a spring at the same time. Garage door tune-up $50-$150.

HomeGuide, HomeAdvisor, Angi, and Bob Vila cluster tightly around a $150-$350 typical range for a single-door, two-spring replacement, with HomeAdvisor, Angi, and Bob Vila all citing a $250 national average and near-identical per-spring pricing (torsion $75-$150, extension $50-$100) — expected given HomeAdvisor and Angi are commonly owned and republish similar data, so Bob Vila and HomeGuide are the more independent confirmation of that band. This Old House reports notably higher installed figures ($300-$540, average $420), which appears to reflect its Homewyse-sourced contractor-quote methodology (more comprehensive labor assumptions) rather than a directly comparable base job. national_average_usd is anchored to the $250 figure four of five sources cite verbatim; range_low_usd uses HomeGuide's extension-spring low end ($120); range_high_usd uses This Old House's high end ($540), which also lines up with HomeAdvisor's two-single-door total ($425) and spring+cable combined cost (Bob Vila, $450) as a realistic ceiling for a bigger job. by_type figures are cross-checked across HomeAdvisor, Angi, and Bob Vila (all agree on $75-$150 torsion, $50-$100 extension per spring); the single-door and two-door totals come from HomeAdvisor. Every source independently warns against DIY replacement given the high spring tension involved.