Metal Siding Cost: $3,958–$19,216 (Average $11,193) in 2026
Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·5 min read·5 sources Quick answerQuick answer: Metal siding typically costs $3,958 to $19,216 for a full project, averaging about $11,193 nationally (HomeAdvisor). Per square foot, expect roughly $4 to $16 installed for steel and $3 to $18 for aluminum, with tin the cheapest option and zinc or copper the most expensive.
- ✓The national average cost to install metal siding is about $11,193, with most projects falling between $3,958 and $19,216 (HomeAdvisor).
- ✓Per square foot installed, steel runs $4 to $16 and aluminum runs $3 to $18, while tin can be as low as $1 to $3 (HomeAdvisor).
- ✓Zinc and copper are the priciest options, with zinc reaching up to $45 per square foot and copper up to $50 per square foot installed (HomeAdvisor, Fixr).
- ✓Labor typically makes up 30% to 60% of the total project cost (Fixr, HomeAdvisor).
How much does metal siding cost?
National average
$11,193
total project
Typical range
$3,958–$19,216
Most projects
Whole project
$3,958–$19,216
$2,375avg $11,193$26,902+
Advertisement · 728 × 90
Cost by material / type
| Type | Low | High |
|---|
| Tin (per sq ft, installed) | $1 | $3 |
| Aluminum (per sq ft, installed) | $3 | $18 |
| Galvalume steel (per sq ft, installed) | $4 | $12 |
| Coated/painted steel (per sq ft, installed) | $7 | $16 |
| Standing seam panels (per sq ft, installed) | $10 | $16 |
| Zinc (per sq ft, installed) | $15 | $45 |
| Copper (per sq ft, installed) | $20 | $50 |
What affects the cost?
- Metal type — tin runs as low as $1-$3/sq ft while zinc and copper can reach $45-$50/sq ft installed (HomeAdvisor, Fixr)
- Panel style/profile — corrugated panels run about $7-$12/sq ft installed vs. $10-$16/sq ft for standing seam (Fixr)
- Gauge/thickness — heavier 26-gauge steel carries roughly a 20-25% premium over lighter 29-gauge panels (Fixr)
- Labor, which typically makes up 30% to 60% of the total project cost (Fixr, HomeAdvisor)
- Home size — whole-project totals span roughly $3,958-$19,216 for a typical job, with the full reported range running from $320 to $38,496 depending on house size (HomeAdvisor)
- Removal and disposal of old siding, generally $1,000-$2,500 (Fixr), plus soffit/gutter repairs often needed alongside the job, about $1,050-$3,300 (HomeAdvisor)
- Substrate repairs before panels go up, roughly $2-$5/sq ft (Fixr)
- Permits, typically $150-$1,500 but up to $3,000 in more regulated jurisdictions (Fixr)
- Insulated panel upgrades, which add about $1-$2.50/sq ft (Fixr)
- Region and local labor market rates
The price mainly comes down to metal type and project size. A full metal siding job typically runs $3,958 to $19,216, averaging about $11,193 nationally, though the full reported range stretches from $320 to $38,496 depending on house size (HomeAdvisor). Per square foot installed, tin is the cheapest at $1 to $3, aluminum runs $3 to $18, and steel lands between $4 and $16 (HomeAdvisor). Premium metals cost far more: zinc runs $15 to $45 per square foot and copper reaches $20 to $50 per square foot installed, depending on the source (HomeAdvisor, Fixr). For a mid-size home, HomeGuide puts steel siding on a 2,000 sq ft house at $14,000 to $32,000. Labor is a major share of the total, typically making up 30% to 60% of the project cost (Fixr, HomeAdvisor), and jobs under 500 square feet often see doubled or tripled per-square-foot pricing because minimum labor and delivery charges apply regardless of size (Angi).
What affects the cost?
A few factors explain most of the gap between a $4,000 job and a $19,000+ one:
- Metal type. Tin costs $1 to $3 per square foot installed, while zinc and copper can reach $45 to $50 per square foot — a more than 15x spread (HomeAdvisor, Fixr).
- Panel style and profile. Corrugated panels run about $7 to $12 per square foot installed, while standing seam panels with concealed fasteners run $10 to $16 per square foot (Fixr).
- Gauge/thickness. Heavier 26-gauge steel carries roughly a 20% to 25% premium over lighter 29-gauge panels (Fixr).
- Home size. Larger homes need more material and labor hours, and total project pricing scales from a few hundred dollars for small repairs up to nearly $40,000 for large, premium jobs (HomeAdvisor).
- Old siding removal and substrate repair. Tear-off and disposal typically runs $1,000 to $2,500, and fixing damaged sheathing underneath adds $2 to $5 per square foot (Fixr).
- Permits. Building permits generally run $150 to $1,500, but can reach $3,000 in more heavily regulated jurisdictions (Fixr).
- Insulated panel upgrades. Adding rigid insulation behind the panels typically adds $1 to $2.50 per square foot (Fixr).
- Region and local labor rates. Pricing varies by market, which is a major reason national estimates differ from source to source.
- Choose Galvalume steel or tin over premium metals if the look works for your home — copper runs $30 to $50 per square foot installed versus $4 to $12 for basic Galvalume steel, so switching metals can mean a substantial per-square-foot savings (Fixr).
- Pick corrugated panels over standing seam where appropriate — corrugated panels run $7 to $12 per square foot installed versus $10 to $16 for standing seam (Fixr).
- Keep existing siding in place when the substrate allows it. Skipping tear-off avoids the $1,000 to $2,500 removal charge (Fixr).
- Bundle the job if your project is small. Because jobs under 500 square feet often see per-square-foot pricing double or triple due to minimum labor and delivery fees, combining siding work with other exterior projects can help absorb those fixed costs (Angi).
- Get quotes from multiple contractors. Since labor alone can represent 30% to 60% of total cost, comparing bids can meaningfully change your final number (Fixr, HomeAdvisor).
- Ask about lighter gauge options where wind and impact codes allow it, since 26-gauge panels carry a 20% to 25% premium over 29-gauge (Fixr).
Prices vary by region, home size, and metal type, so treat the figures above as a planning budget. Get two or three local quotes, and confirm whether tear-off, substrate repair, and permits are included, before committing to a final number.
Advertisement · 336 × 280
Frequently asked questions
How much does metal siding cost per square foot?+
Installed pricing generally runs $1 to $35 per square foot depending on metal type and profile, but most homeowners land in the $4 to $16 per square foot range for steel, or $3 to $18 for aluminum (HomeAdvisor, Fixr).
What's the cheapest type of metal siding?+
Tin is the most budget-friendly option at roughly $1 to $3 per square foot installed, followed by basic Galvalume steel at $4 to $12 per square foot (HomeAdvisor, Fixr).
How much does it cost to side a 2,000 sq ft house with steel?+
HomeGuide puts steel siding for a 2,000 sq ft house at $14,000 to $32,000, reflecting steel's $7 to $16 per square foot installed range for that size of home.
Why is standing seam metal siding more expensive?+
Standing seam panels use a concealed-fastener system and heavier gauge material, which pushes installed pricing to about $10 to $16 per square foot, compared to $7 to $12 per square foot for basic corrugated panels (Fixr).
Does the quoted price include tearing off my old siding?+
Usually not. Tear-off and disposal of existing siding typically runs $1,000 to $2,500 as a separate line item, and any needed substrate repairs add another $2 to $5 per square foot (Fixr).
Why do metal siding cost estimates vary so much between sites?+
Whole-project averages differ because sources sample different home sizes and material mixes — HomeAdvisor reports an $11,193 average while Fixr reports $17,000. Per-square-foot steel pricing varies by source too: HomeGuide puts it at $7 to $16, while Angi reports $4 to $8 for standard steel installation (its $16 figure applies only to seamless steel with concealed fasteners). Homewyse's $8.82 to $14.67 range covers metal siding generally, not steel specifically.
Sources
Figures synthesized and cross-checked across these sources (retrieved 2026-07-24):
- HomeAdvisor — Average cost $11,193; normal range $3,958-$19,216; full range $320 to $38,496. Per square foot overall range $1 to $35. By metal type per sq ft: tin $1-$3, aluminum $3-$18, steel $4-$16, zinc $15-$25, copper $20-$35. Corrugated steel $5 to $8 per square foot; seamless steel up to $16 per square foot; steel log style averages $5 per square foot. Soffit and gutter repair $1,050-$3,300. Labor is 30% to 60% of total cost.
- Fixr — National average range $9,000-$28,000; average cost $17,000. Overall $4 to $16 per sq.ft. fully installed. By metal type per sq ft: aluminum $3-$18, Galvalume steel $4-$12, coated/painted steel $7-$16, zinc $20-$45, copper $30-$50. By panel style per sq ft: corrugated $7-$12, ag panel/PBR $7-$12, board and batten $9-$14, wood-grain $9-$14, standing seam $10-$16. Labor $2-$12 per sq ft (30-60% of total). Tear-off/disposal $1,000-$2,500. Substrate repairs $2-$5 per sq ft. Permits $150-$1,500 (up to $3,000 in regulated areas). Insulated panels add $1-$2.50 per sq ft. 26-gauge carries roughly a 20-25% premium over 29-gauge.
- Homewyse — National average cost range $8.82 to $14.67 per square foot installed, covering materials, installation labor, job supplies, and equipment allowance for a standard mid-range job. General contractor overhead adds 13-22% if applicable.
- HomeGuide — Metal siding costs $7 to $16 per square foot installed for steel or $6 to $10 per square foot installed for aluminum. Steel siding costs $14,000 to $32,000 on average for a 2,000 sq ft house. Prices vary by metal type, thickness, finish, and fastener-panel design.
- Angi — Metal siding typically costs $1 to $35 per square foot to install. Most steel siding costs $4 to $8 per square foot installed. Corrugated metal siding prices are usually $5-$8 per square foot. Seamless steel panels with concealed fasteners cost up to $16 per square foot. Per-sq-ft cost may double or triple for jobs under 500 sq ft due to minimum labor/delivery costs.
Sources agree on the broad shape of metal siding pricing but diverge on whole-project averages: HomeAdvisor's stated average is $11,193 with a typical range of $3,958-$19,216 (full spread $320-$38,496), while Fixr states a national average of $17,000 across a $9,000-$28,000 range. This guide uses HomeAdvisor's figures as the primary national_average_usd and range since it publishes a specific average with a defined typical range; Fixr's higher total-project figures likely reflect larger average home sizes or premium materials/profiles in its sample and are noted here for context. Per-square-foot pricing is more consistent across sources: Homewyse's cost calculator shows $8.82-$14.67/sq ft installed for a standard job, HomeGuide reports $7-$16/sq ft for steel and $6-$10/sq ft for aluminum, and Angi reports steel typically at $4-$8/sq ft (up to $16/sq ft for seamless steel with concealed fasteners) with an overall market span of $1-$35/sq ft across all metal types. The by_type breakdown blends Fixr's detailed per-material figures with HomeAdvisor's, widening the zinc and copper ranges to cover both sources' reported spans ($15-$25 vs. $20-$45 for zinc; $20-$35 vs. $30-$50 for copper). Figures generally cover materials and standard installation labor; tear-off/disposal of existing siding, substrate repair, permits, and insulated panel upgrades are typically extra unless a source states otherwise.