Stucco Siding Cost: $2,202–$9,259 (Average $5,726) in 2026
Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·5 min read·4 sources Quick answerQuick answer: Stucco siding typically costs $2,202 to $9,259 per project, averaging about $5,726 nationally. Per square foot, traditional three-coat stucco runs roughly $6 to $9.66 installed, while synthetic (EIFS) systems can reach $18, and a full re-stucco on a mid-size home often runs well above the national blended average.
- ✓The national average cost for stucco work is about $5,726, with most projects falling between $2,202 and $9,259 (HomeAdvisor).
- ✓Traditional three-coat stucco costs roughly $6 to $9.66 per square foot installed, while synthetic (EIFS) systems run $8 to $18 per square foot (HomeAdvisor, This Old House).
- ✓A full re-stucco on a 2,000 sq ft home typically runs $10,200 to $18,700, well above HomeAdvisor's blended national average (HomeAdvisor).
- ✓Labor makes up 50% to 80% of the total cost, running about $1 to $9 per square foot depending on the source (HomeAdvisor, Fixr).
How much does stucco siding cost?
National average
$5,726
total project
Typical range
$2,202–$9,259
Most projects
Whole project
$2,202–$9,259
Advertisement · 728 × 90
Cost by material / type
| Type | Low | High |
|---|
| traditional 3-coat stucco (per sq ft, installed) | $6 | $10 |
| one-coat stucco system (per sq ft, installed) | $3 | $10 |
| synthetic stucco / EIFS (per sq ft, installed) | $8 | $18 |
What affects the cost?
- Home size and total exterior wall square footage (Fixr, HomeAdvisor, This Old House)
- Stucco system chosen: traditional 3-coat vs. one-coat vs. synthetic/EIFS (This Old House, HomeAdvisor)
- Removal of old siding or existing stucco before new material goes on, about $1-$3 per sq ft (Fixr)
- Labor rates and contractor availability by region, roughly $2-$9 per sq ft or $45-$85 per person per hour (Fixr)
- Wall complexity, architectural detail, and trim/window work
- Site accessibility, such as scaffolding needed for multi-story homes (This Old House)
- General contractor oversight, which Homewyse notes can add 13-22% to the estimate
Why does stucco siding cost so much?
The price depends heavily on project size and stucco system. HomeAdvisor’s national blended average sits at $5,726, with most jobs falling between $2,202 and $9,259, but that figure mixes small patch jobs with full house exteriors (HomeAdvisor). Once you scope the job to a full re-stucco on a typical home, the numbers climb fast: a 2,000 sq ft house runs $10,200 to $18,700 by HomeAdvisor’s own size table, $12,000 to $16,000 by Fixr’s, and $21,252 to $26,565 for a 2,000-2,500 sq ft home by This Old House’s. Per square foot, traditional three-coat stucco costs about $6 to $9.66 installed (Fixr, HomeAdvisor, This Old House), while synthetic EIFS systems run $8 to $18 per square foot because of pricier materials and specialized labor (HomeAdvisor, This Old House). Labor alone typically accounts for 50% to 80% of the bill (HomeAdvisor).
What affects the cost?
A few factors explain most of the gap between a $2,200 patch job and a $25,000+ full re-stucco:
- Total exterior wall square footage. Larger homes need more material and labor hours, which scales cost directly – Fixr’s size table runs from $3,000-$4,000 for 500 sq ft up to $15,000-$20,000 for 2,500 sq ft (Fixr).
- Stucco system chosen. One-coat systems run about $3-$9.75 per square foot, traditional three-coat stucco runs $6-$9.66 per square foot, and synthetic EIFS runs $8-$18 per square foot (This Old House, HomeAdvisor).
- Old siding or stucco removal. Tearing off existing material before the new coat goes on adds about $1 to $3 per square foot when it’s part of the job (Fixr).
- Labor rates and availability. Professional labor runs $2 to $9 per square foot, or $45 to $85 per person per hour, and varies significantly by region (Fixr).
- Wall complexity and trim work. Homes with more architectural detail, windows, and corners take longer to finish, adding to labor time.
- Site accessibility. Multi-story homes often need scaffolding, which adds to the total (This Old House).
- General contractor oversight. Homewyse notes that having a GC supervise the project can add 13% to 22% to the estimate.
How to lower your stucco siding cost
- Consider a one-coat system over traditional three-coat or EIFS where it’s appropriate for your climate – it can cost roughly half of synthetic stucco per square foot (This Old House).
- Keep sound existing stucco in place when possible. Skipping full removal avoids the $1 to $3 per square foot teardown charge (Fixr).
- Get quotes from multiple contractors. Because labor alone can range from $2 to $9 per square foot, comparing bids can meaningfully change your total (Fixr).
- Ask whether a general contractor is necessary. Working directly with an installation crew instead of routing through a GC can avoid the 13-22% overhead Homewyse flags (Homewyse).
- Repair small areas instead of a full re-stucco if damage is limited – patch work falls at the low end of the national range rather than triggering a whole-house project (HomeAdvisor).
Prices vary by region, home size, and stucco system, so treat the figures above as a planning budget. Get two or three local quotes, and confirm whether removal, scaffolding, and general contractor fees are included, before committing to a final number.
Advertisement · 336 × 280
Frequently asked questions
How much does it cost to stucco a 2,000 sq ft house?+
For a 2,000 sq ft home, Fixr puts the range at $12,000 to $16,000, HomeAdvisor at $10,200 to $18,700, and This Old House shows 2,000-2,500 sq ft homes at $21,252 to $26,565 -- the spread comes down to stucco system and local labor rates (Fixr, HomeAdvisor, This Old House).
What's the cheapest type of stucco system?+
One-coat stucco systems are the most budget-friendly option, running about $3 to $9.75 per square foot installed (This Old House), compared to $8 to $18 per square foot for synthetic (EIFS) systems (HomeAdvisor, This Old House).
Does the quoted price include removing my old siding?+
Usually not. Removing old siding or stucco is typically a separate line item that adds about $1 to $3 per square foot on top of the new installation (Fixr).
Why do cost estimates for stucco vary so much?+
HomeAdvisor's national average ($5,726) blends small jobs with full re-stucco projects, while per-square-foot rates reported by different sources range from about $6-$9.66 (Fixr, HomeAdvisor, This Old House) for traditional stucco up to $10.69-$17.33 (Homewyse), mainly because they weight stucco system and region differently and some bundle general contractor overhead into the figure.
Is synthetic stucco (EIFS) more expensive than traditional stucco?+
Yes. Traditional three-coat stucco runs about $6 to $9.66 per square foot installed, while synthetic (EIFS) systems cost $8 to $18 per square foot, mainly due to higher material and specialized installation costs (HomeAdvisor, This Old House).
How much does labor alone cost for stucco installation?+
Labor makes up 50% to 80% of the total project cost and runs about $1 to $3 per square foot on its own by HomeAdvisor's estimate, or $2 to $9 per square foot (or $45 to $85 per person per hour) by Fixr's estimate.
Sources
Figures synthesized and cross-checked across these sources (retrieved 2026-07-24):
- HomeAdvisor — Average $5,726, normal range $2,202-$9,259. Per sq ft: $7-$9 traditional. By type: Acrylic $6-$9/sq ft, Lime $6-$9/sq ft, Synthetic (EIFS) $8-$12/sq ft, Traditional $6-$9/sq ft. By home size: 1,000 sq ft $7,200-$13,200 (avg $9,600); 2,000 sq ft $10,200-$18,700 (avg $13,600); 3,000 sq ft $13,200-$24,200 (avg $17,600). Labor 50-80% of total, $1-$3/sq ft. Repairs $60-$120 per sq ft; replacement $7-$12/sq ft.
- Fixr — National average $9,500-$11,500, average $10,500. Most stucco costs $6-$8 per sq ft installed using a three-coat system. By home size: 500 sq ft $3,000-$4,000; 1,000 sq ft $6,000-$8,000; 1,500 sq ft $9,000-$12,000; 2,000 sq ft $12,000-$16,000; 2,500 sq ft $15,000-$20,000. By system (materials only): one-coat $1-$3/sq ft, three-coat $2-$4/sq ft, EIFS $3-$5/sq ft. Labor $2-$9 per foot or $45-$85 per person per hour. Removal $1-$3/sq ft; resurfacing $4-$5/sq ft; stucco over brick/cinder block $6-$12/sq ft.
- This Old House — Average $6.36-$9.66 per sq ft, around $24,150 for a 2,500 sq ft house. Traditional: materials $6.36/sq ft, installation $3.30/sq ft, total $6.36-$9.66/sq ft. Synthetic (EIFS): materials $7.25-$10/sq ft, installation $2.95-$7.50/sq ft, total $10-$18/sq ft. One-coat systems: about $3-$9.75/sq ft. By home size: 1,000-1,500 sq ft $10,626-$15,939; 1,500-2,000 sq ft $15,939-$21,252; 2,000-2,500 sq ft $21,252-$26,565; 2,500-3,000 sq ft $26,565-$31,878; 3,000 sq ft $31,878. Siding removal ~$3,122 for a 2,500 sq ft home.
- Homewyse — May 2026 estimated national average cost to install stucco starts at $10.69-$17.33 per square foot for mid-range work in readily serviceable conditions. General contractor oversight can add 13-22% to the estimate; excludes permits, sales tax, and hazardous material testing.
Sources disagree substantially depending on how 'project' is scoped. HomeAdvisor's national average ($5,726, range $2,202-$9,259) blends small and large stucco jobs together. Full-house project tables tell a different story: Fixr shows a 2,000 sq ft home at $12,000-$16,000, HomeAdvisor shows the same size at $10,200-$18,700, and This Old House shows 2,000-2,500 sq ft at $21,252-$26,565 -- so a whole-house re-stucco on a mid-size home commonly lands well above HomeAdvisor's blended national average. Per-square-foot installed pricing also varies by system: traditional 3-coat stucco runs about $6-$9.66/sq ft (Fixr, HomeAdvisor, This Old House), one-coat systems about $3-$9.75/sq ft (This Old House), and synthetic/EIFS $8-$18/sq ft (HomeAdvisor low end, This Old House high end). Homewyse's $10.69-$17.33/sq ft 'starting' estimate reflects fully-loaded contractor pricing and sits at the high end of the other sources. Figures generally cover materials and standard installation labor; removing old siding, scaffolding, and structural repairs are typically priced separately.