Vinyl Fence Cost: $2,340–$5,994 Average in 2026

Why does a vinyl fence cost $2,340 to $5,994?

Vinyl fencing costs more upfront than wood because you’re paying for a material that doesn’t need repainting or resealing. Angi puts the national average total project cost at $4,156, with most homeowners paying between $2,340 and $5,994 depending on fence style, height, and length (Angi). Fixr and Bob Vila report similar figures — averages of $5,800 and $4,045 respectively, with ranges landing in the same general $2,300-$7,300 window. Broken down per linear foot, standard 4- to 6-foot vinyl fencing runs $15 to $40 installed, split roughly between $10-$30 in materials and $5-$10 in labor (Angi, Fixr, Bob Vila). HomeGuide’s figures run higher, at $30-$60 per linear foot, largely because its baseline example leans toward taller privacy fencing rather than a basic picket or split-rail style. The bottom line: length and style do more to move your total than almost anything else.

What affects the cost?

A handful of variables explain most of the spread between a $2,300 fence and a $6,000-plus one:

• Style. Split-rail (three-rail) fencing is cheapest at $11-$30 per linear foot. Picket runs $14-$45, privacy runs $15-$85, lattice-top runs $18-$45, and shadowbox runs $18-$65 per linear foot, depending on source and height (Fixr, Bob Vila, HomeGuide, Angi).
• Height. Fixr and Bob Vila both show cost climbing with height: about $15-$25 per linear foot at 4 feet, up to $40-$60 per linear foot at 12 feet. HomeGuide shows the same pattern for privacy fencing specifically, jumping from $40-$60 per linear foot at 6 feet to $60-$85 at 8 feet.
• Color and finish. White is the standard, cheapest option at roughly $20-$25 per linear foot in materials. Gray runs $25-$45, wood-grain textures run $30-$55, and black runs $30-$65 (Bob Vila).
• Posts. More posts mean more material and labor — wider panel spacing between posts reduces the total post count, and post material grade affects price too.
• Gates. A single gate adds $150 to $2,200 depending on width and style, with double gates and sliding gates at the higher end (HomeGuide, Fixr, Angi).
• Site prep. Removing an old fence adds $3-$5 per linear foot (Angi), and yard grading, tree/stump removal, and property surveys are separate line items on top of the fence itself.
• Location. Labor rates and cost of living vary by state and region, which affects the per-linear-foot installed price you’ll pay locally.

How to lower your vinyl fence cost

• Pick a simpler style. Split-rail or basic picket fencing costs a fraction of tall privacy or shadowbox styles per linear foot — if the goal is marking a boundary rather than blocking sightlines, this is the single biggest lever (Fixr, Bob Vila, HomeGuide).
• Stick with white. Standard white vinyl runs about $20-$25 per linear foot in materials, well under the $30-$65 range for black or wood-grain finishes (Bob Vila).
• Keep the height practical. Dropping from an 8-foot to a 6-foot privacy fence can cut the per-linear-foot rate by roughly a third based on HomeGuide’s height breakdown.
• Minimize gates and posts where you can. Wider panels between posts mean fewer posts to install, and each additional gate can add several hundred dollars (Angi, HomeGuide).
• Handle demo yourself if you’re replacing an old fence. Old fence removal runs about $3-$5 per linear foot (Angi) — doing it yourself, where safe and allowed, avoids that add-on entirely.
• Get multiple local quotes. Per-linear-foot pricing varies by installer and region, so a couple of local bids will tell you more than any national figure.

Prices vary by region, fence length, and installer, so treat the figures above as a planning budget rather than a quote. Confirm whether gates, old fence removal, and post-hole work are included before comparing bids.