Concrete Sidewalk Cost: $1,200–$3,400 (Average $2,200) in 2026
Author: CostGuideHQ Editorial·✓ Fact-checked·Updated July 2026·5 min read·5 sources Quick answerQuick answer: A standard 200 sq ft concrete sidewalk costs $1,200 to $3,400, averaging around $2,200 nationally, or roughly $6 to $17 per square foot. Broom-finish concrete sits at the low end; stamped, stained, or high-end custom finishes push the price toward $20-$25 per square foot.
- ✓A typical 200 sq ft concrete sidewalk costs $1,200 to $3,400, averaging about $2,200 (Angi, HomeGuide, Forbes Home).
- ✓Per square foot, expect $6 to $17 for standard installation, and up to $12.00-$14.71 per square foot for a basic professional job per 2026 unit-cost data (Forbes Home, HomeGuide, Homewyse).
- ✓A 4ft-wide sidewalk runs about $28 to $68 per linear foot installed (HomeGuide).
- ✓Decorative finishes cost more: stamped concrete runs $10-$21 per square foot and acid-stained concrete runs $12-$25 per square foot (HomeGuide, Angi).
How much does concrete sidewalk cost?
National average
$2,200
total project
Typical range
$1,200–$3,400
Most projects
Whole project
$1,200–$3,400
Advertisement · 728 × 90
Cost by material / type
| Type | Low | High |
|---|
| standard/broom finish (per sq ft) | $6 | $12 |
| mid-range/decorative (per sq ft) | $12 | $17 |
| high-end/custom (per sq ft) | $17 | $20 |
| stamped concrete (per sq ft) | $10 | $21 |
| acid-stained concrete (per sq ft) | $12 | $25 |
What affects the cost?
- Total square footage -- small jobs under 100 sq ft pay a higher per-sq-ft rate due to minimum concrete delivery fees (HomeGuide, Angi)
- Concrete thickness -- most sidewalks are 4in thick; 6in thick for heavier foot/vehicle traffic costs more per sq ft (Angi, HomeAdvisor)
- Finish/decorative treatment -- a plain broom finish is the cheapest option; stamped, acid-stained, or exposed aggregate finishes cost more per square foot (Angi, HomeGuide)
- Shape -- straight runs are cheapest; curves and custom forms push labor hours and cost higher (Angi, HomeAdvisor)
- Site preparation -- excavation, grading, and a gravel or sand base add a few hundred dollars and are often quoted separately (HomeGuide, Homewyse)
- Old concrete removal when replacing an existing sidewalk, about $2-$8 per sq ft including disposal (Angi, HomeGuide)
- Permits -- sidewalks are usually a permanent land improvement requiring a permit, $50-$1,000 depending on locality (Angi, HomeGuide)
- Labor rates by region, roughly $40-$130 per hour depending on market (Angi, Forbes Home, HomeAdvisor)
- Reinforcement choice -- wire mesh ($50-$200 per 200 sq ft) vs. rebar ($0.40-$2.25 per linear ft or ~$100 per 200 sq ft) (Angi, Forbes Home)
Why does a concrete sidewalk cost so much?
Cost comes down to square footage, thickness, and finish. A standard 200 sq ft sidewalk runs $1,200 to $3,400, averaging around $2,200 (Angi, HomeGuide, Forbes Home) — Angi and Forbes Home cluster closer to $1,800-$2,000 for a basic broom finish, while HomeGuide’s range runs higher, up to $3,400, once decorative options are factored in. Per square foot, plain broom-finish concrete costs $6 to $12 (Forbes Home, Angi), and Homewyse’s 2026 unit-cost data puts a basic professional install at $12.00 to $14.71 per square foot before excavation (Homewyse). Materials alone are cheap — about $250 for the 2.5 cubic yards of concrete a 200 sq ft, 4-inch-thick sidewalk needs (Forbes Home) — so labor is what drives the bill, running $75 to $82 per hour on average and taking 17 to 18 hours for a 200 sq ft job (Angi, Forbes Home). Widen the path to 4 feet and price it by linear foot instead, and it lands around $28 to $68 per linear foot (HomeGuide).
What affects the cost?
A few factors explain most of the spread between a $1,200 sidewalk and one that runs $3,400 or more:
- Finish. Plain broom finish is cheapest at $6-$12 per sq ft. Stamped concrete runs $10-$21 per sq ft, and acid-stained or high-end custom finishes can reach $17-$25 per sq ft (Forbes Home, HomeGuide, Angi).
- Thickness. Most sidewalks are poured 4 inches thick; bumping up to 6 inches for heavier traffic adds to both material and labor cost (Angi, HomeAdvisor).
- Shape. Straight runs keep costs down. Curves and custom forms mean more setup time, adding to the roughly 18 hours of labor a straight 200 sq ft job typically takes (Angi).
- Site preparation. Grading, excavation, and a gravel or sand base aren’t always included in the base quote and can add a few hundred dollars (HomeGuide, Homewyse).
- Old concrete removal. Replacing an existing sidewalk adds $2-$8 per sq ft to tear out and dispose of the old slab (Angi, HomeGuide).
- Permits. Because a sidewalk is a permanent land improvement, most municipalities require a permit costing $50-$1,000 (Angi, HomeGuide).
- Labor rates. Regional rates for concrete work run $40-$130 per hour depending on the market (Angi, Forbes Home, HomeAdvisor).
- Reinforcement. Wire mesh ($50-$200 for a 200 sq ft job) is cheaper than rebar reinforcement, though rebar holds up better under heavier loads (Angi, Forbes Home).
How to lower your concrete sidewalk cost
- Stick with a broom finish. Plain broom-finished concrete is the cheapest option at $6-$12 per sq ft — decorative finishes like stamping or acid staining can more than double that (Forbes Home, HomeGuide).
- Keep the layout straight. Avoiding curves and custom forms saves on the extra labor hours contractors need to build custom molds (Angi).
- Check whether you actually need 6-inch-thick concrete. Standard 4-inch concrete is sufficient for foot traffic only; save the thicker, pricier pour for areas that need to support vehicles (Angi, HomeAdvisor).
- Handle basic grading yourself where it’s safe to do so. Site prep like clearing loose soil or minor grading is sometimes billed separately, so ask what your quote includes (HomeGuide, Homewyse).
- Get your permit early. Permit costs vary widely by city ($50-$1,000), so check with your local building department before budgeting (Angi, HomeGuide).
- Get at least three quotes. Because Angi, Forbes Home, and HomeGuide each report different typical ranges for the same size job, local pricing varies enough that comparing bids is the only way to know your real number.
Prices vary by region, sidewalk size, and finish, so treat the figures above as a planning budget. Confirm what’s included — site prep, old-concrete removal, and permits — before comparing contractor bids.
Advertisement · 336 × 280
Frequently asked questions
How much does a concrete sidewalk cost on average?+
A standard 200 sq ft concrete sidewalk averages about $2,200, with most homeowners paying between $1,200 and $3,400 depending on finish, thickness, and site prep (Angi, HomeGuide, Forbes Home).
How much is a concrete sidewalk per square foot?+
Standard broom-finish concrete runs $6 to $12 per square foot, with the overall market range running $7 to $17 per square foot once decorative finishes are included (Forbes Home, HomeGuide).
How much does a concrete sidewalk cost per linear foot?+
For a typical 4ft-wide sidewalk, expect about $28 to $68 per linear foot installed (HomeGuide).
How much more does stamped or stained concrete cost?+
Stamped concrete sidewalks run $10 to $21 per square foot installed, and acid-stained concrete runs $12 to $25 per square foot, well above the $6-$12 per square foot for plain broom finish (HomeGuide, Angi).
Does the sidewalk cost include removing the old concrete?+
No. Removing and disposing of an existing sidewalk typically costs an extra $2 to $8 per square foot on top of the new installation price (Angi, HomeGuide).
Do I need a permit to install a concrete sidewalk?+
Usually yes, since a sidewalk is considered a permanent land improvement. Permits typically run $50 to $1,000 depending on your municipality (Angi, HomeGuide).
Sources
Figures synthesized and cross-checked across these sources (retrieved 2026-07-24):
- Angi — Normal range $1,600-$2,400; average $2,000; low end $1,200; high end $3,200. About $10 per sq ft for a 200 sq ft walkway including labor and materials. By size (4in thick): 75 sq ft $600-$900; 100 sq ft $800-$1,200; 130 sq ft $1,050-$1,550; 200 sq ft $1,600-$2,400. Standard flat concrete $8-$12/sq ft. By finish per sq ft: broom finish $8-$12; colored concrete $8-$12; exposed aggregate $8-$12; polished $8-$12; salt finish $8-$12; stamped $8-$12; trowel finish $8-$12; acid stained $12-$25; stained $18-$20. Labor ~$75/hour ($50-$130 range), ~18 hours for 200 sq ft (~$1,350, range $900-$2,250). Concrete removal $2-$6/sq ft. Permits $200-$1,000. Wire mesh $50-$200; rebar ~$100 for 200 sq ft.
- HomeGuide — $7-$17 average cost per sq ft; $1,400-$3,400 average total cost installed (200 sq ft). 4ft-wide sidewalk costs $28-$68 per linear foot. Up to $20/sq ft for high-end custom designs. By size: 50 sq ft $350-$850; 100 sq ft $700-$1,700; 200 sq ft $1,400-$3,400; 400 sq ft $2,800-$6,800. Per sq ft by tier: low-end/basic $7-$12; mid-range/average $12-$17; high-end/custom $17-$20. Stamped concrete sidewalk $10-$21 per sq ft installed for a 4ft-wide path. Replacement (remove + replace) $10-$25+/sq ft. Concrete removal $3-$8/sq ft. Sidewalk permit $50-$100.
- Homewyse — May 2026 national average cost to install a concrete sidewalk: $12.00-$14.71 per sq ft (basic mid-range work, 4+ inch thick fibermesh-reinforced 3500 PSI concrete, broom finish). Example for 120 sq ft: totals $1,441-$1,766, or $12.01-$14.72 per sq ft. Excavation option adds $236-$286 for 2.5 hours.
- Forbes Home — Standard 200 sq ft concrete walkway costs $1,200-$2,400, average $1,800. Per sq ft: $6-$12, most homeowners pay around $9/sq ft. By size: 50 sq ft $450; 100 sq ft $900; 200 sq ft $1,800; 300 sq ft $2,700; 500 sq ft $4,500. Labor $40-$125/hour, average $82/hour; ~17 hours for 200 sq ft ($680-$2,125, average ~$1,400). Materials ~$250 for 2.5 cubic yards (200 sq ft, 4in thick); delivery $100-$200. By finish per sq ft: polished $3-$30; stained $3-$25; stamped $9-$25; epoxy coating $5-$10. Rebar $0.40-$2.25/linear ft; wire mesh $1-$1.50/sq ft.
- HomeAdvisor — Normal range $1,600-$2,400; average $2,000; low end $1,200; high end $3,200 -- matches Angi (same parent company, Angi Inc.). $10/sq ft average, $8-$12/sq ft for standard finishes. Concrete delivery ~$130/cubic yard (~$310 for 200 sq ft). By finish per sq ft: polished $8-$12; acid-stained $12-$25; stamped $8-$12. Labor ~$75/hour ($50-$130 range), ~18 hours for 200 sq ft (~$1,350, range $900-$2,250). Wire mesh $50-$200 for 200 sq ft; rebar ~$100.
National average and range are synthesized from a standard 200 sq ft concrete sidewalk, the project size most sources use as their baseline. Angi and HomeAdvisor report identical underlying data (both Angi Inc. properties): average $2,000, typical range $1,200-$3,200. Forbes Home reports a lower average of $1,800 (range $1,200-$2,400) at roughly $6-$12/sq ft, averaging $9/sq ft. HomeGuide reports the widest range, $1,400-$3,400 for 200 sq ft, or $7-$17/sq ft overall (up to $20/sq ft for high-end custom work), plus $28-$68 per linear foot for a 4ft-wide sidewalk. Homewyse's 2026 unit-cost calculator lands higher, $12.00-$14.71/sq ft for basic mid-range professional installation with a broom finish, excluding excavation. The blended national_average_usd ($2,200) is a synthesized figure -- not a single cited number -- that falls within every individual source's own range (Angi/HomeAdvisor $1,200-$3,200, Forbes Home $1,200-$2,400, HomeGuide $1,400-$3,400); the published range ($1,200-$3,400) spans the low end of Angi/Forbes to the high end of HomeGuide. Figures generally cover standard 4in-thick broom-finish concrete, materials, and installation labor; they typically exclude permits ($50-$1,000), excavation/demolition of an old sidewalk ($2-$8/sq ft), gravel or sand base, and vapor barrier -- these are called out as separate line items by every source. Decorative finishes (stamped, stained, exposed aggregate, acid-stained) are frequently disallowed by municipalities for public sidewalks per Angi and HomeGuide, but are common on private residential walkways.